KBC-L (2600 Series)
SMST Designers & Constructors BV KBC-L (2600 Series) — Deck/Offshore Knuckle Boom Crane - Subsea Operations.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Perform functional test of AHC motor controller under simulated vessel motion. Verify response time <200ms and load stability within ±5% tolerance. Check 5th generation AHC firmware version certification.
Perform ultrasonic thickness measurement of pedestal welds. Verify bolt torque on pedestal base attachment. Conduct DnV/ABS/LRS visual surface crack inspection. Check for fatigue cracks under pedestal collar.
Perform load proof test at 125% of rated SWL. Test emergency stop responsiveness. Verify brake pad wear against wear limit specifications. Check hydraulic pressure relief settings for deep water operations (up to 3000m).
Visually inspect knuckle pin for corrosion/crevice attack in marine environment. Measure lateral play at knuckle joint (max tolerance: 3mm). Check hydraulic cylinder rod conditions for pitting. Verify articulation smoothness through full range of motion.
Verify accelerometer/heave sensor calibration certificate (annual). Perform zero-offset test with vessel stationary. Check sensor cable integrity for water ingress. Compare compensation values against baseline from last inspection for drift indication.
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →