OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Engine Room› Pumps› Submersible Pump› Grindex Solid
Grindex

Solid

Submersible Pump · Pumps

Technical data from manufacturer or class sources · not yet verified by a person

In marine environments, where efficiency and reliability are paramount, specialized equipment is essential for a wide range of tasks. The Grindex Solid is designed to excel in such demanding conditions. This robust pump is built to handle a variety of applications, making it a valuable asset for maritime operations. The Grindex Solid offers a comprehensive solution for users seeking a dependable and high-performing pumping solution. Grindex provides a wide range of products, including the Solid, to meet the diverse needs of the maritime industry. For more information about the Grindex Solid, including technical specifications and case studies, please visit the Grindex website.

Specifications

Technical data.reference — unverified

Power0.9-1.5 kW (1.2-2 HP)
Flow~25 m³/h (110 GPM)
Head12 mwc (39 ft)
Solids Passage38 mm
Inspection

Inspector Detail

Common issues

  • Impeller/wear plate erosion from abrasive sludge, reducing flow and head
  • Mechanical seal leakage allowing water ingress to the motor housing
  • Cable gland leakage or damage compromising the submersible rating
  • Overheating from dry running or a blocked strainer
  • Solids blockage above the rated passage size jamming the impeller
  • Bearing wear from continuous submerged operation
  • Float switch/level control failure causing dry running or overflow

Inspection checklist

  • Insulation resistance test of motor windings
  • Check seal-housing oil for water contamination (moisture indicator)
  • Inspect mechanical seal condition at the scheduled service interval
  • Check impeller-to-wear-plate clearance
  • Inspect power cable and gland for damage
  • Function test the thermal protection/overload trip
  • Check float switch/level control operation if fitted
  • Verify pump inlet is free of debris before deployment

Service intervals

Seal oil checkevery ~2000 running hours or annually, whichever first - confirm against Grindex manual
Insulation resistance testat each service
Impeller/wear plate inspectionannual or condition-based
Bearing grease/replacementper manufacturer interval, confirm against manual

Typical wear limits

Impeller-to-wear-plate clearancetypically in the region of 0.3-0.8 mm depending on pump size - confirm against the Grindex manual for this model
Mechanical sealcondition/leak-based assessment, no fixed wear figure

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Mechanical seal kit
  • Impeller
  • Wear plate
  • O-rings/gasket set
  • Cable gland kit
  • Bearings

Safety

  • Electrical hazard from submerged equipment with a damaged cable or seal
  • Lifting hazard - pump weight plus sludge contamination
  • Confined space entry when retrieving from bilge/tank
  • Hot motor surfaces after prolonged running

Class survey

Bilge/sludge pumping arrangements fall under SOLAS/MARPOL machinery-space drainage requirements. Class checks pump capacity against the approved bilge pumping calculation and functional-tests the arrangement at survey; oily water/sludge handling is documented per the vessel's Oil Record Book procedures where applicable.

Estimated lifetime: Submersible sludge/drainage pumps of this class typically give in the order of 15,000-25,000 running hours before major overhaul (seal/bearing renewal), heavily dependent on solids content and duty cycle - treat as indicative only.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Grindex equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Submersible Pump.

Other models of the same equipment type, Grindex first.

By manufacturer KawamotoGrindexEbara MarineTsurumiDESMIGrundfos MarineHidrostalKloskaCalpeda MarineSEIMINikkiso ACDAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like Solid
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this Grindex Solid — a part, a service call, a second opinion. Are you Grindex? Claim this brand page.

Service engineer? Write the day report for this Solid in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.