RVP-130 MS
Shinko RVP-130 MS — Fire and general service bilge pump.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Verify nameplate capacity (m³/h) and delivery head (m or bar) match datasheet specifications; confirm pump not operating beyond rated parameters
Inspect bore dimensions for corrosion, erosion, or cavitation damage; measure actual bore diameter to verify against specifications; check for debris or blockages
For motor-driven pumps: verify motor specs (kW, voltage, Hz) and test insulation resistance; for steam-driven: inspect steam supply lines, pressure regulators, and condensate return
Check for leakage around shaft seal; inspect seal material condition; verify proper lubrication (if mechanical seal); assess gland packing compression
Baseline vibration measurement; listen for abnormal cavitation or grinding sounds; check pump mounting bolts for looseness; verify alignment with driver
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →