216.40
Houttuin 216.40 — Horizontal transfer pump for non-lubricating liquids with high viscosity capability.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Check coupling alignment with dial indicator after installation and weekly during operation; axial/radial deviation must not exceed 0.25 mm (0.010 inch); recheck after one week of operation
Check axial clearance of shafts (max 0.2 mm / 0.0080 inch) and timing gear clearance (max 0.5 mm / 0.0020 inch); replace timing gears if clearance exceeded; inspect screw shafts and cylinders for damage
Verify inlet pressure and flow characteristics; confirm low NPSH requirements are maintained (Houttuin pumps designed for <0.5 bar NPSH); monitor for cavitation noise/vibration indicating suction line issues
Inspect seal chamber for weeping or stream leaks; verify cooling lines patent if integral cooling present; check seal API Plan (90/Plan 2 for pressurized sealing); monitor gearbox oil level and condition for timely lubrication of timing gears
Measure overall vibration (ISO 10816); confirm major misalignment will cause shorter coupling/bearing life and vibration spikes; inspect bearings (internal or external) for noise and play; replace if vibration levels abnormal
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →