OceanSphereENGINES
Library› Deck› Bow/Stern Thrusters› Bow/Stern Thruster› Marquip MQ Tunnel 2000kW
Marquip

MQ Tunnel 2000kW

Bow/Stern Thruster · Bow/Stern Thrusters

Technical data from manufacturer or class sources · not yet verified by a person​‍​⁠​​‌‌​‌‍‌​⁠​‍‍⁠​‍
2,000 kWPower

Marquip MQ Tunnel 2000kW — MQ Tunnel, 2000 kW, 140 kN thrust. As a Stern Thrusters / Bow/Stern Thruster, it is normally installed in a transverse tunnel or dedicated thruster compartment near the aft part of the vessel with electric or hydraulic drive and control interfaces. In that role, its primary purpose is to generate transverse thrust for low-speed manoeuvring, berthing and position control. Compared with the main propeller and rudder, a transverse thruster is optimized for lateral manoeuvring at low vessel speed and depends on tunnel flow, propeller condition and a high-power drive system. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Power (kW)2000
Thrust (kN)140.0
Thruster typeMQ Tunnel
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect propeller and tunnel when accessible, seals, gearbox or bearings, lubrication, motor or hydraulic drive and control feedback. Review vibration, temperature and oil condition and check for leakage. Test bridge and local control under an approved manoeuvring procedure. Refer to the manufacturer documentation for the exact figure for oil, clearance, electrical and wear limits.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry seals, filters, approved lubricant, bearings where appropriate, motor-control or drive spares, feedback sensors and critical hydraulic or electrical components.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Marquip equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Bow/Stern Thruster.

Other models of the same equipment type, Marquip first.

By manufacturer SchottelRolls-Royce Marine / KongsbergBrunvollWärtsiläABB MarineKobeltThrustmaster of TexasSchraven B.V.SteerpropBerg PropulsionIHC MarineVeth PropulsionVetusMarquipVoithAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like MQ Tunnel 2000kW
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Marquip MQ Tunnel 2000kW — a part, a service call, a second opinion. Are you Marquip? Claim this brand page.

Service engineer? Write the day report for this MQ Tunnel 2000kW in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.