OceanSphereENGINES
Library› Engine Room› Turbochargers› Turbocharger› Kawasaki (KBB) A ST51-A

A ST51-A

Turbocharger · Turbochargers

Technical data from manufacturer or class sources · not yet verified by a person​‍​‍⁠⁠​⁠‌⁠‍​‌‌​‌‌‍‍⁠

Kawasaki KBB-A ST51-A — KBB-A, 6000 kW max.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Frame SizeST51-A
Power max (kW)6000
Inspection

Inspector Detail

Common issues

  • Bearing wear (journal and thrust bearings) leading to increased rotor play and potential contact.
  • Compressor wheel fouling or erosion, reducing efficiency and airflow, often due to dirty intake air or water ingress.
  • Turbine wheel fouling or erosion, reducing efficiency and increasing exhaust back pressure, often due to poor fuel combustion or high exhaust gas temperatures.
  • Nozzle ring and diffuser damage (cracks, erosion, deformation) impacting gas flow and turbocharger performance.
  • Oil leakage from bearing housing seals (compressor or turbine side), leading to oil consumption and potential contamination of charge air or exhaust gas.
  • Excessive vibration due to rotor imbalance, bearing damage, or foreign object damage.
  • Cracks in the turbine casing or exhaust gas inlet casing, typically due to thermal stress cycles.
  • Exhaust gas leakage from casing joints or expansion bellows, indicating gasket failure or mechanical stress.

Inspection checklist

  • Check for any visible oil or exhaust gas leaks around the casings, pipe connections, and drain lines.
  • Perform a 'finger check' or dial gauge measurement for rotor axial and radial play to assess bearing condition.
  • Inspect compressor wheel blades for fouling, erosion, foreign object damage, and rubbing marks against the casing.
  • Inspect turbine wheel blades (if accessible) for fouling, erosion, cracks, and foreign object damage.
  • Examine the nozzle ring and diffuser for cracks, erosion, and deformation, ensuring free movement if variable geometry.
  • Check the condition of the air filter elements and charge air cooler for cleanliness and integrity.
  • Verify lubricating oil pressure and temperature at the turbocharger inlet, and inspect oil drain for proper flow.
  • Listen for unusual noises (whining, grinding) and check vibration levels using onboard monitoring systems or portable instruments.
  • Inspect all casing bolts for tightness and signs of thermal stress or corrosion.
  • Confirm proper operation of the turbocharger's cooling system (if applicable) and drainage lines.

Service intervals

Routine visual inspectionDaily/Weekly
Water washing (compressor/turbine)250-500 running hours (as per engine load/fuel quality)
Dry cleaning (compressor/turbine)2,000-4,000 running hours (as per engine load/fuel quality)
Bearing inspection/renewal8,000-12,000 running hours (or annually, whichever comes first)
Minor overhaul (inspection of rotor, bearings, nozzle ring, diffuser)16,000-24,000 running hours
Major overhaul (complete disassembly, inspection, balancing, component renewal)32,000-48,000 running hours

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Rotor axial playNew: 0.10 - 0.25 mm; Service limit: 0.30 - 0.40 mm (refer to specific manual for exact values)
Rotor radial playNew: 0.05 - 0.15 mm; Service limit: 0.20 - 0.30 mm (refer to specific manual for exact values)
Compressor/Turbine blade tip clearanceVisual inspection for rubbing marks; any contact indicates severe bearing wear or rotor imbalance.
Nozzle ring deformation/erosionMax. 10-15% reduction in flow area or significant distortion affecting gas flow (visual assessment, compare to new).
Bearing shell thicknessRefer to manufacturer's manual for minimum allowable thickness; usually a few tenths of a millimeter reduction.

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Complete bearing cartridge set (journal bearings, thrust bearing, thrust collar)
  • Oil sealing rings / Labyrinth seals (compressor and turbine side)
  • Gasket and O-ring set for casing joints and connections
  • Nozzle ring (especially if operating with heavy fuel oil)
  • Diffuser (if prone to damage or erosion)
  • Lubricating oil filter elements (if integral to TC system)
  • High-speed balancing kit (if major overhaul is performed onboard)
  • Compressor wheel (if operating in abrasive environments or high risk of FOD)

Safety

  • High surface temperatures of turbine casing and exhaust piping (burn hazard, fire risk).
  • Extremely high rotational speeds (up to 60,000-80,000 RPM for this size); potential for catastrophic disintegration if unbalanced or bearings fail.
  • Pressurized exhaust gas and charge air; sudden release can cause injury or damage.
  • Hot lubricating oil under pressure; risk of burns and fire if leaks occur.
  • High noise levels during operation; hearing protection is mandatory in the vicinity.

Class survey

A class surveyor will typically review the turbocharger's maintenance logbook, including running hours, records of bearing renewals, cleaning cycles, and any major overhauls. They will visually inspect for external leaks (oil, exhaust gas, charge air), excessive vibration, and general condition. The surveyor may request to witness the engine running to observe turbocharger performance and listen for abnormal noises. Documentation of spare parts inventory and compliance with manufacturer's service recommendations are also key points of verification.

Estimated lifetime: 32,000 - 48,000 running hours before requiring a complete major overhaul with significant component renewal or replacement.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Kawasaki (KBB) equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Turbocharger.

Other models of the same equipment type, Kawasaki (KBB) first.

By manufacturer ABBMAN Energy SolutionsIHIMitsubishiABB Turbocharging / AccelleronKawasakiPBSTCummins Holset TurbochargersNapierMAN ES TurbochargingMitsubishi METGarrett Motion MarineVolvo PentaKBB TurboKompressorenbau BannewitzAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Kawasaki (KBB) models More like KBB-A ST51-A
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Kawasaki (KBB) A ST51-A — a part, a service call, a second opinion. Are you Kawasaki (KBB)? Claim this brand page.

Service engineer? Write the day report for this A ST51-A in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.