OceanSphereENGINES
Library› Engine Room› Turbochargers› Turbocharger› Kawasaki (KBB) A ST46-A

A ST46-A

Turbocharger · Turbochargers

Technical data from manufacturer or class sources · not yet verified by a person​‍​‍⁠⁠​⁠‌‍​⁠⁠⁠‌‌​‍‌​

Kawasaki KBB-A ST46-A — KBB-A, 6000 kW max.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Frame SizeST46-A
Power max (kW)6000
Inspection

Inspector Detail ✓ verified

Common issues

  • Bearing wear (journal and thrust bearings) due to oil contamination, insufficient lubrication, or prolonged operation, leading to increased axial/radial play.
  • Compressor wheel fouling, particularly in humid or dusty environments, or due to crankcase blow-by, reducing efficiency and potentially causing imbalance.
  • Turbine wheel and nozzle ring fouling/erosion from HFO combustion products, high exhaust gas temperatures, or abrasive particles, leading to reduced power and increased exhaust back pressure.
  • Oil leakage from bearing housing seals (labyrinth or mechanical seals), often indicated by oil mist in the compressor volute or exhaust gas stream, or external leaks.
  • Rotor imbalance leading to excessive vibration, typically caused by uneven fouling, blade damage, or bearing wear, which can escalate to catastrophic failure.
  • Cracks in turbine casing due to severe thermal cycling and stress, especially around the inlet flange or mounting points.
  • Foreign object damage (FOD) to compressor or turbine blades, leading to imbalance, reduced efficiency, and potential rotor failure.
  • Reduced turbocharger efficiency due to worn or damaged diffuser and volute components.

Inspection checklist

  • Measure and record axial and radial clearances of the rotor using a dial gauge, comparing against manufacturer's specified limits.
  • Visually inspect compressor and turbine wheels for fouling, erosion, cracks, foreign object damage, and blade tip condition. Check for signs of rubbing.
  • Inspect nozzle ring and diffuser for fouling, erosion, cracks, and proper seating. Verify gas passage clearances.
  • Check the turbocharger's lubrication system: verify oil supply pressure and temperature, inspect oil drain lines for free flow, and check for any oil leaks.
  • Inspect the integrity of the turbocharger casings (compressor, bearing, turbine) for cracks, especially in high-stress areas, and ensure all mounting bolts are secure.
  • Check the condition and cleanliness of the air intake filter element. Ensure no debris is entering the compressor.
  • Monitor turbocharger speed, boost pressure, and exhaust gas temperatures (before and after turbine) during engine operation for deviations from normal parameters.
  • Listen for unusual noises (whining, grinding, rubbing) or observe excessive vibration during operation, which may indicate bearing or rotor issues.

Service intervals

Routine Inspection (visual, noise, vibration, oil parameters)Daily/Weekly
Rotor Water Washing (for HFO operation)250 - 500 running hours
Bearing Inspection/Replacement (journal and thrust bearings)8,000 - 12,000 running hours
Minor Overhaul (cleaning, inspection, bearing replacement, seal replacement)12,000 - 16,000 running hours
Major Overhaul (full disassembly, inspection, replacement of worn parts including potentially nozzle ring, diffuser, critical seals)24,000 - 32,000 running hours

Typical wear limits

Axial Clearance (Rotor Play)New: 0.10 - 0.15 mm; Max allowable: 0.30 - 0.40 mm
Radial Clearance (Bearing Play)New: 0.20 - 0.30 mm; Max allowable: 0.50 - 0.60 mm
Bearing Bush Inner DiameterMax allowable increase from new: 0.05 - 0.10 mm
Turbine/Compressor Blade Tip ClearanceMax allowable increase from new: 0.1 - 0.2 mm (indicates casing wear or blade erosion)
Nozzle Ring GapMax allowable increase from new: 0.1 - 0.2 mm

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Complete Bearing Cartridge/Assembly (includes journal and thrust bearings, bearing bush, and associated seals)
  • Oil Sealing Rings / Labyrinth Seals (compressor and turbine side)
  • Gasket and O-ring Set (for complete overhaul)
  • Nozzle Ring (especially for HFO applications, as it's prone to fouling and erosion)
  • Air Filter Elements
  • Specialized tools for disassembly and assembly (e.g., rotor locking tools, lifting gear)

Safety

  • High-Speed Rotating Machinery: The rotor operates at extremely high RPMs (e.g., 20,000-40,000 RPM). Catastrophic failure (e.g., blade loss, rotor disintegration) can result in high-velocity projectiles.
  • High Temperatures: The turbine casing and exhaust gas ducts can reach 400-600°C. Risk of severe burns upon contact. Ensure insulation is intact.
  • High Pressures: Compressor discharge air pressure can be 3-5 bar. Risk of injury from sudden release of compressed air or failure of associated piping.
  • Hot Oil Under Pressure: The lubrication system carries hot oil under pressure. Leaks can create a spray fire hazard, especially if oil contacts hot surfaces.
  • Noise Hazard: Operating turbochargers generate significant noise levels (typically >100 dB). Hearing protection is mandatory in the vicinity.

Class survey

A class surveyor will typically focus on verifying the turbocharger's operational integrity and compliance with safety and maintenance standards. This includes reviewing the vessel's maintenance records (running hours, service history, spare parts used, and adherence to manufacturer's service schedule). They will conduct a visual inspection for external oil or exhaust gas leaks, cracks in casings, security of mounting bolts, and integrity of insulation. If the turbocharger is opened for inspection (e.g., during a scheduled overhaul), the surveyor will witness critical measurements such as axial and radial clearances. They will also verify the functionality of any associated safety devices (e.g., overspeed trip, low oil pressure alarms) and confirm proper operation during engine trials, checking parameters like boost pressure, exhaust gas temperatures, and turbocharger speed. The condition of the air intake filter and exhaust gas ducts will also be checked for cleanliness and integrity.

Estimated lifetime: 24,000 - 32,000 hours (before major overhaul requiring significant component inspection and potential replacement)

Need this part?

Request a quote for this model.

Free of charge — send us your request for Kawasaki (KBB) equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Turbocharger.

Other models of the same equipment type, Kawasaki (KBB) first.

By manufacturer ABBMAN Energy SolutionsIHIMitsubishiABB Turbocharging / AccelleronKawasakiPBSTCummins Holset TurbochargersNapierMAN ES TurbochargingMitsubishi METGarrett Motion MarineVolvo Pentaengine.od / Other TurbochargersKBB TurboAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Kawasaki (KBB) models More like KBB-A ST46-A
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Kawasaki (KBB) A ST46-A — a part, a service call, a second opinion. Are you Kawasaki (KBB)? Claim this brand page.

Service engineer? Write the day report for this A ST46-A in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.