OceanSphereENGINES
Library› Engine Room› Turbochargers› Turbocharger› ABB Turbocharging / Accelleron VTC 564

VTC 564

Turbocharger · Turbochargers

Technical data from manufacturer or class sources · not yet verified by a person​‍​‍⁠‍⁠​⁠‌‌‍​⁠​‍‍​‌‌

The ABB VTC 564 is a high‑power variable geometry turbocharger designed for large 4‑stroke common‑rail marine diesel engines, delivering up to 12 MW of boost pressure.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Frame Size564
Power max (kW)12000
Inspection

Inspector Detail

Common issues

  • Bearing wear (journal and thrust bearings) leading to increased clearances and vibration.
  • Fouling of compressor wheel and diffuser, reducing efficiency and air flow.
  • Fouling and erosion of turbine blades and nozzle ring due to exhaust gas impurities and high temperatures.
  • Oil leakage from bearing housings or connections, indicating seal degradation or pressure issues.
  • Rotor imbalance due to material accumulation, erosion, or damage, causing excessive vibration and noise.
  • Surging, often caused by engine load changes, air filter blockage, or turbocharger component damage.
  • Exhaust gas leaks from casing joints or expansion bellows, reducing turbine efficiency and posing safety risks.
  • Damage to air filter elements, leading to foreign object damage (FOD) on the compressor wheel.

Inspection checklist

  • Check axial (end float) and radial clearances of the rotor shaft. Compare with manufacturer's limits.
  • Visually inspect compressor wheel for fouling, erosion, cracks, or foreign object damage (FOD).
  • Visually inspect turbine blades and nozzle ring for fouling, erosion, cracks, or signs of contact.
  • Verify the condition of the lubricating oil system: check oil pressure, flow, filter elements, and cooler efficiency. Inspect for oil leaks.
  • Examine the turbocharger casing for cracks, hot spots, or exhaust gas leakage at joints and connections.
  • Inspect the air filter element for cleanliness and integrity. Ensure proper sealing.
  • Check the security of all mounting bolts and connections, including exhaust gas and air ducts.
  • Listen for unusual noises or vibrations during operation. Monitor exhaust gas temperatures before and after the turbine.
  • Confirm the functionality of the overspeed trip mechanism (if fitted) and associated alarms.

Service intervals

Compressor water washing250-500 running hours (or as indicated by performance drop)
Turbine dry cleaning (if applicable)500-1000 running hours
Bearing inspection (axial/radial clearances)8,000-12,000 running hours
Bearing renewal (journal and thrust)16,000-24,000 running hours
Major overhaul (rotor removal, cleaning, balancing, full inspection)24,000-36,000 running hours

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Rotor axial clearance (end float)New: 0.10-0.15 mm; Max allowed: 0.25-0.30 mm
Rotor radial clearance (journal bearings)New: 0.15-0.20 mm; Max allowed: 0.30-0.35 mm
Rotor run-out (at shaft ends)Max allowed: 0.05 mm
Blade tip clearances (compressor/turbine)Any evidence of rubbing or contact is critical; significant erosion requires replacement.
Shaft ovalityMax allowed: 0.02 mm

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Complete set of journal and thrust bearings (including sleeves and pads)
  • O-rings, gaskets, and sealing rings for bearing housings and casing joints
  • Lubricating oil filter elements
  • Nozzle ring (especially if operating in high-fouling conditions)
  • Balancing weights and shims for rotor re-balancing
  • Air filter elements (if integrated)
  • High-temperature bolts and nuts for casing connections

Safety

  • High surface temperatures of the turbine casing and exhaust gas piping, posing severe burn hazards.
  • High-speed rotating components (rotor) present a severe injury risk if guards are removed or during maintenance.
  • Potential for high-pressure exhaust gas or compressed air release during maintenance or failure, causing hearing damage or injury.
  • Lube oil leaks can create slip hazards and increase fire risk in the engine room.
  • Heavy lifting and specialized tools are required for major maintenance, necessitating proper rigging and safety procedures.

Class survey

Class surveyors typically focus on the overall condition, cleanliness, and operational integrity. They will review logbook entries for performance trends (boost pressure, exhaust gas temperatures, vibration levels). Witnessing bearing clearance measurements (axial and radial) is a common requirement during scheduled surveys. They will also check for any signs of oil or gas leakage, the security of mounting arrangements, and the functionality of safety devices like overspeed trips and alarms. Documentation of maintenance and spare parts availability is also scrutinized.

Estimated lifetime: 24,000-36,000 hours (before first major overhaul, with subsequent overhauls extending total operational life significantly beyond 100,000 hours if properly maintained)

Need this part?

Request a quote for this model.

Free of charge — send us your request for ABB Turbocharging / Accelleron equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Turbocharger.

Other models of the same equipment type, ABB Turbocharging / Accelleron first.

By manufacturer ABBMAN Energy SolutionsIHIMitsubishiABB Turbocharging / AccelleronKawasakiPBSTCummins Holset TurbochargersNapierMAN ES TurbochargingMitsubishi METGarrett Motion MarineVolvo Pentaengine.od / Other TurbochargersKBB TurboAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All ABB Turbocharging / Accelleron models More like VTC 564
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this ABB Turbocharging / Accelleron VTC 564 — a part, a service call, a second opinion. Are you ABB Turbocharging / Accelleron? Claim this brand page.

Service engineer? Write the day report for this VTC 564 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.