OceanSphereENGINES
Biblioteka› Engine Room› Turbosprężarki› Turbosprężarka› ABB Turbocharging / Accelleron A170-L 170-L42

A170-L 170-L42

Turbosprężarka · Turbosprężarki

Dane techniczne ze źródeł producenta lub towarzystwa · jeszcze niesprawdzone ręcznie​‍​‍⁠‍‍⁠‌‌‌‍‍⁠‌⁠​‍‍⁠

The ABB A170‑L (frame 170‑L42) is a high‑capacity turbocharger built for two‑stroke slow‑speed marine diesel engines up to roughly 25 MW, delivering efficient exhaust‑gas energy recovery and boost pressure for main propulsion.

Dane techniczne

Dane techniczne.dane referencyjne — niezweryfikowane

Masz kartę katalogową producenta dla tego modelu? Wyślij ją razem z formularzem zapytania — sprawdzimy ją i podamy źródło.

Wielkość mechaniczna170-L42
Power max (kW)25000
Inspekcja

Szczegóły inspektora

Typowe problemy

  • Bearing wear or failure (thrust and radial) due to high loads, lubrication issues, or contamination, leading to increased vibration and potential rotor damage.
  • Compressor fouling (air side) from dirty intake air, reducing efficiency, increasing exhaust temperatures, and potentially leading to surging.
  • Turbine fouling and erosion (gas side) from heavy fuel oil combustion products, causing reduced power, increased back pressure, and potential blade damage.
  • Nozzle ring and/or cover ring deformation, carbon build-up, or erosion, leading to inefficient gas flow and reduced turbocharger performance.
  • Oil leakage from bearing housing seals (labyrinth or piston ring type) into the compressor or turbine side, indicating seal wear or pressure imbalances.
  • Rotor imbalance, often caused by fouling, blade damage, or bearing wear, resulting in excessive vibration and accelerated component degradation.
  • Turbocharger surging, typically due to severe fouling, engine operating conditions, or damage to compressor/turbine components.

Lista kontrolna przeglądu

  • Check for any oil leaks from the bearing housing, drain pipes, and sealing air lines. Ensure all connections are tight.
  • Inspect the compressor wheel for fouling, erosion, foreign object damage (FOD), or signs of rubbing. Verify air filter condition.
  • Inspect the turbine wheel for fouling, erosion, cracks, or FOD (requires opening gas casing). Check for carbon build-up on blades and shroud.
  • Examine the nozzle ring and cover ring for carbon deposits, deformation, cracks, or excessive wear (requires opening gas casing).
  • Verify rotor free rotation by hand (when engine is stopped and safe to do so) and check for excessive axial and radial play. Listen for unusual noises.
  • Check security of all mounting bolts, exhaust gas connections, air ducting, and support brackets. Look for signs of vibration-induced fatigue.
  • Monitor turbocharger performance parameters: boost pressure, exhaust gas temperatures (inlet/outlet), bearing temperatures, and lubricating oil pressure/flow.
  • Inspect the scavenge drains from the gas casing for blockages or signs of oil carry-over.

Interwały serwisowe

Compressor water washEvery 24-72 running hours (depending on load and air quality)
Turbine dry cleaning (granulate)Every 250-500 running hours
Bearing inspection (visual, clearances)8,000 - 16,000 running hours
Bearing renewal (complete cartridge)16,000 - 24,000 running hours
Major overhaul (rotor balancing, casing inspection, full strip-down)24,000 - 48,000 running hours or as condition dictates

Typowe interwały dla tej klasy konstrukcji, nie dane producenta dla Twojego modelu. Wiążąca jest instrukcja producenta.

Typowe granice zużycia

Axial Bearing Clearance (new)0.15 - 0.30 mm
Axial Bearing Clearance (max allowable)0.40 - 0.50 mm
Radial Bearing Clearance (new)0.10 - 0.25 mm
Radial Bearing Clearance (max allowable)0.35 - 0.45 mm
Nozzle Ring Gap (between segments, max allowable)1.5 - 2.0 mm (beyond new condition)
Rotor Run-out (at shaft ends, max allowable)0.02 - 0.05 mm
Compressor/Turbine Blade Tip ClearanceManufacturer specific, typically 0.5 - 1.5 mm (critical for efficiency and avoiding rubbing)

Zakresy są typowe dla tej klasy konstrukcyjnej. Decydujące są zawsze dokumenty producenta dla danego numeru seryjnego.

Krytyczne części zamienne

  • Complete bearing cartridge assembly (including thrust and radial bearings, seals, and associated O-rings/gaskets)
  • Sealing air labyrinth seals / piston rings (for both compressor and turbine side)
  • Full set of O-rings and gaskets for bearing housing and casing openings
  • Nozzle ring segments (if modular design) or a complete nozzle ring assembly
  • Air filter elements (if applicable to the specific intake arrangement)
  • Special tools for rotor handling, bearing removal/installation, and casing opening
  • Lubricating oil pump (if externally driven and critical for operation)

Bezpieczeństwo

  • High Rotational Speed: Risk of rotor disintegration if overspeed occurs, or due to severe imbalance/damage. Always ensure overspeed trip is functional.
  • High Temperatures: Exhaust gas casing and associated piping can reach 300-450°C. Risk of severe burns. Ensure insulation is intact.
  • Pressurized Systems: Air and exhaust gas are under significant pressure. Sudden release can be dangerous. Always depressurize before opening.
  • Hot Lubricating Oil: Risk of burns during inspection or maintenance. Ensure oil lines are isolated and cooled before handling.
  • Heavy Components: Lifting and handling of casings, rotor, and other major components requires proper lifting gear, procedures, and trained personnel.

Przegląd klasyfikacyjny

Class surveyors typically verify the following: 1. Review of maintenance records, including bearing renewals, cleaning logs, and major overhaul reports. 2. Visual inspection for external oil/gas leaks, secure mounting, and general condition of casings and connections. 3. Confirmation of satisfactory performance during engine operation (e.g., boost pressure, exhaust gas temperatures, absence of surging). 4. Witnessing or verification of the overspeed trip device functionality (often during engine trials or specific maintenance). 5. Inspection of safety guards, insulation, and fire fighting arrangements around the turbocharger. 6. Review of onboard spare parts inventory for critical items as per manufacturer's recommendations and class requirements.

Szacowana trwałość: 24,000 - 48,000 running hours before major overhaul or rotor exchange, depending on operating conditions, maintenance quality, and component condition. Main casings and shaft can last significantly longer with proper care.

Potrzebujesz tej części?

Zapytaj o ofertę na ten model.

Bezpłatnie — wyślij zapytanie dotyczące sprzętu ABB Turbocharging / Accelleron. Nasz zespół je sprawdzi i odpowie e-mailem.

W przypadku sprzętu okrętowego prawie żaden producent ani autoryzowany dystrybutor nie podaje ceny, dopóki statek jest nieznany. Z danymi statku dostępność i cenę da się ustalić szybciej; bez nich być może musimy najpierw dopytać, co kosztuje kilka dni. Jeśli nie wolno Ci podać statku, wystarczy zdjęcie tabliczki znamionowej — dołącz je poniżej lub odeślij w odpowiedzi na nasz e-mail potwierdzający.

Twoje dane kontaktowe nie są publikowane. Konto nie jest wymagane.
Powiązane modeli

Także w Turbosprężarka.

Inne modele tego samego typu sprzętu, najpierw ABB Turbocharging / Accelleron.

Według producenta ABBMAN Energy SolutionsIHIMitsubishiABB Turbocharging / AccelleronKawasakiPBSTCummins Holset TurbochargersNapierMAN ES TurbochargingMitsubishi METGarrett Motion MarineVolvo PentaKBB TurboKompressorenbau BannewitzWszyscy producenciCzęści według urządzeńNowy użytkownik? Załóż darmowe konto Nieczytelna tabliczka? Wypróbuj skaner tabliczek Wszystkie modele ABB Turbocharging / Accelleron Podobne do A170-L 170-L42
Więcej, niż pokazuje karta katalogowa

Odpowiadamy e-mailem, nigdy automatem.

Powiedz nam, czego potrzebujesz do tego ABB Turbocharging / Accelleron A170-L 170-L42 — części, wizyty serwisowej, drugiej opinii. Czy jesteś ABB Turbocharging / Accelleron? Przejmij tę stronę marki.

Serwisant? Napisz raport dzienny dla tego A170-L 170-L42 w OceanSphere Work — zdjęcia, godziny i części, jako PDF dla armatora. Wypróbuj 14 dni za darmo →

Często pytane

Pytania, które pojawiają się przy tym sprzęcie.

Czy dane tego modelu są bezpłatne?

Tak. Dane techniczne, dokumenty i uwagi serwisowe tego modelu są dostępne bez konta. Konto dodaje zapisane wyszukiwania i zapytania, niczego nie odbiera.

Czy znajdziecie część dokładnie do tego modelu?

Tak. Podaj producenta, model i czego potrzebujesz — każde zapytanie czyta człowiek i odpowiada e-mailem.

Dane techniczne wydają się błędne — co teraz?

Wyślij nam tabliczkę lub prawidłową wartość. Sprawdzimy ją w karcie danych producenta lub rejestrze towarzystwa klasyfikacyjnego i zaktualizujemy stronę.