Turbocharger · Turbochargers
The ABB A170‑L (frame 170‑L42) is a high‑capacity turbocharger built for two‑stroke slow‑speed marine diesel engines up to roughly 25 MW, delivering efficient exhaust‑gas energy recovery and boost pressure for main propulsion.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
| Compressor water wash | Every 24-72 running hours (depending on load and air quality) |
|---|---|
| Turbine dry cleaning (granulate) | Every 250-500 running hours |
| Bearing inspection (visual, clearances) | 8,000 - 16,000 running hours |
| Bearing renewal (complete cartridge) | 16,000 - 24,000 running hours |
| Major overhaul (rotor balancing, casing inspection, full strip-down) | 24,000 - 48,000 running hours or as condition dictates |
Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.
| Axial Bearing Clearance (new) | 0.15 - 0.30 mm |
|---|---|
| Axial Bearing Clearance (max allowable) | 0.40 - 0.50 mm |
| Radial Bearing Clearance (new) | 0.10 - 0.25 mm |
| Radial Bearing Clearance (max allowable) | 0.35 - 0.45 mm |
| Nozzle Ring Gap (between segments, max allowable) | 1.5 - 2.0 mm (beyond new condition) |
| Rotor Run-out (at shaft ends, max allowable) | 0.02 - 0.05 mm |
| Compressor/Turbine Blade Tip Clearance | Manufacturer specific, typically 0.5 - 1.5 mm (critical for efficiency and avoiding rubbing) |
Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.
Class surveyors typically verify the following: 1. Review of maintenance records, including bearing renewals, cleaning logs, and major overhaul reports. 2. Visual inspection for external oil/gas leaks, secure mounting, and general condition of casings and connections. 3. Confirmation of satisfactory performance during engine operation (e.g., boost pressure, exhaust gas temperatures, absence of surging). 4. Witnessing or verification of the overspeed trip device functionality (often during engine trials or specific maintenance). 5. Inspection of safety guards, insulation, and fire fighting arrangements around the turbocharger. 6. Review of onboard spare parts inventory for critical items as per manufacturer's recommendations and class requirements.
Estimated lifetime: 24,000 - 48,000 running hours before major overhaul or rotor exchange, depending on operating conditions, maintenance quality, and component condition. Main casings and shaft can last significantly longer with proper care.
Free of charge — send us your request for ABB Turbocharging / Accelleron equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, ABB Turbocharging / Accelleron first.
Tell us what you need for this ABB Turbocharging / Accelleron A170-L 170-L42 — a part, a service call, a second opinion. Are you ABB Turbocharging / Accelleron? Claim this brand page.
Service engineer? Write the day report for this A170-L 170-L42 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.