"> Jotron Jotron EPIRB Tron 45GPS RINA-C
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 9 verified suppliers & service companies for Jotron in the Maritime Network Find suppliers →
Jotron

Jotron EPIRB Tron 45GPS RINA-C

Jotron Jotron EPIRB Tron 45GPS RINA-C is listed in the source as a marine EPIRB (406 MHz) within the EPIRB group. Equipment of this type is typically installed at the GMDSS console, bridge, muster or survival-craft station, or in an exposed release position according to the equipment function. Its primary duty is maritime distress, safety or communications duties associated with the EPIRB (406 MHz), and it depends on the radio or beacon electronics, antenna path, programmed identity, battery or ship supply and required self-test or control functions. Neighboring variants can differ in rating, size, interface, approval basis or arrangement, so the complete model designation and actual nameplate data are important for identification. It normally interfaces with approved antennas or beacons, ship power or dedicated battery supply, navigation data where fitted and GMDSS alarm or console connections. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

certification RINA
solas approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Battery or power-supply deterioration caused by age, poor charging or connection faults can produce low-voltage alarms, failed self-tests or inability to transmit
Antenna, feeder or connector damage caused by corrosion, water ingress or mechanical stress can reduce range or prevent transmission and reception
Programming or configuration errors after replacement can produce identity, channel or communication faults even when the hardware powers up
Control, display or internal electronics faults caused by ageing or moisture can result in failed tests, unreadable indications or intermittent operation
Release, mounting or protective enclosure problems on emergency equipment caused by corrosion or damage can prevent correct deployment or leave the unit physically insecure

Service & Maintenance

Check identification and programming against vessel records, inspect antennas, feeders, mounts and power sources, and perform only the approved self-tests or functional checks. Verify battery and release dates from the actual unit and service documentation rather than assuming intervals. Refer to manufacturer and statutory documentation for exact test procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry approved batteries only where shipboard replacement is permitted, together with fuses, handset or microphone accessories, connectors, protective covers and other maker-approved service items appropriate to the installed unit.
Equipment Model #141127 · ✓ still in production