Stern Ramp · RoRo Equipment
ALMAC Marine Stern Ramp 150t 16m-C is a stern ramp. It is structurally integrated with a vehicle deck, cargo hold or hull opening and connected to the vessel's lifting, hydraulic or securing arrangements. Its purpose is to open, close, support or provide access to cargo spaces while maintaining the structural, weather or water integrity required for the installation. Panels, ramps or doors are combined with hinges, rollers, tracks, hydraulic or electric drives, locking devices, seals, controls and interlocks. The exact model designation and the listed load or size distinguish the arrangement from neighboring cargo-access equipment; refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect hinges, rollers, pins, bearings, hydraulic equipment, locking devices, seals, controls, foundations and high-load structural areas. Function-test limit switches, position indication, interlocks and emergency stopping arrangements with the operating area clear. Check hydraulic hoses and cylinders or electric drives according to the installed design. Examine structural welds for corrosion, cracking or impact damage. Verify all locks are fully engaged and the required closing indication is obtained before sea passage. Refer to the manufacturer documentation for the exact figure for inspection intervals, test loads, closing criteria and wear limits.
Keep seals, hydraulic hoses or cylinder service parts where applicable, limit switches, sensors, locking-device consumables, rollers, bearings and manufacturer-recommended drive components. Critical structural and locking parts must match the approved system. Heavy panels and ramp assemblies are normally strategic spares.
Free of charge — send us your request for ALMAC Marine equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, ALMAC Marine first.
Tell us what you need for this ALMAC Marine Stern Ramp 150t 16m-C — a part, a service call, a second opinion. Are you ALMAC Marine? Claim this brand page.
Service engineer? Write the day report for this Stern Ramp 150t 16m-C in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.