Anchor Windlass · Anchor & Mooring Equipment
Generic Anchor Stockless 20000kg — Anchor & Mooring Equipment. As an Anchor Windlass, it is normally installed on the forecastle, poop deck or another mooring station aligned with anchor chain or mooring line leads. In that role, its primary purpose is to heave, veer, hold and control anchor chain, rope or wire during anchoring and mooring operations. Windlasses are centered on chain handling through a wildcat or cable lifter, while mooring winches use rope or wire drums; both depend on brakes, clutches, gearboxes and reliable drive power. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect brakes, drums or wildcats, clutches, bearings, gearbox, foundation, drive system, controls and guards. Examine rope, wire or chain condition and confirm safe spooling or engagement. Test local and remote controls and emergency functions under the approved vessel procedure. Refer to manufacturer and class documentation for the exact figure for pull, holding load, brake and wear limits.
Carry brake parts, hydraulic seals and hoses where applicable, control-valve or contactor spares, lubrication items, clutch parts, sensors and line-handling hardware.
Free of charge — send us your request for equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, first.
Tell us what you need for this Stockless 20000kg — a part, a service call, a second opinion.
Service engineer? Write the day report for this Stockless 20000kg in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.