Anchor Windlass · Anchor & Mooring Equipment
Generic Anchor AC-14 HHP 4500kg — Anchor & Mooring Equipment. The supplied category identifies the equipment as Anchor Windlass, and it is normally installed on the forecastle, poop deck or another mooring station aligned with anchor chain or mooring line leads. In that listed role, its primary purpose is to heave, veer, hold and control anchor chain, rope or wire during anchoring and mooring operations. Windlasses are centered on chain handling through a wildcat or cable lifter, while mooring winches use rope or wire drums; both depend on brakes, clutches, gearboxes and reliable drive power. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect brakes, drums or wildcats, clutches, bearings, gearbox, foundation, drive system, controls and guards. Examine rope, wire or chain condition and confirm safe spooling or engagement. Test local and remote controls and emergency functions under the approved vessel procedure. Refer to manufacturer and class documentation for the exact figure for pull, holding load, brake and wear limits.
Carry brake parts, hydraulic seals and hoses where applicable, control-valve or contactor spares, lubrication items, clutch parts, sensors and line-handling hardware.
Free of charge — we forward your request to qualified suppliers for equipment from our network of over 114,000 maritime companies.
Tell us what you need for this AC-14 HHP 4500kg — a part, a service call, a second opinion.
Service engineer? Write the day report for this AC-14 HHP 4500kg in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.