"> Generic Anchor AC-14 HHP 500kg
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Generic Anchor

AC-14 HHP 500kg

Generic Anchor AC-14 HHP 500kg is a shipboard unit in the Anchor & Mooring Equipment group, classified in the source as Anchor Windlass. It is normally installed on forecastle, poop deck or mooring stations at the vessel's ends. Its primary duty is to handle anchors, chain and mooring lines and to sustain controlled line loads during anchoring and berthing. In service it interfaces with chain cable, wildcat/gypsy, warping drum, brakes, clutches, hydraulic/electric drives, fairleads and ship structure. Compared with neighboring entries in the same product family, this record is the exact Generic Anchor AC-14 HHP 500kg variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

type AC-14 HHP
weight kg 500
note Anchor specification

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Brake lining or band wear, typically indicated by poor holding, overheating or excessive brake travel
Gearbox/bearing wear from poor lubrication or overload, typically indicated by noise, backlash, vibration or high temperature
Hydraulic leakage or electric-drive fault, typically indicated by slow operation, pressure loss or inability to heave
Clutch or dog engagement wear, typically indicated by incomplete engagement, slipping or shock loading
Corrosion/cracking at foundation, chock or structural fittings, typically indicated by visible wastage, deformation or failed inspection

Service & Maintenance

Inspect brakes, clutches, wildcats/drums, gears, bearings, chain stoppers, foundations, hydraulic/electric drives and controls; verify brake and emergency-release arrangements under approved procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep brake linings, hydraulic seals/hoses, bearings, clutch wear parts, control switches/solenoids and lubrication items appropriate to the installed gear.
Equipment Model #137334 · ✓ still in production