Gyrocompass · Position & Heading
iXBlue / Exail Marins M8 — Position & Heading. It is normally installed on the bridge with the required external sensor, transducer or antenna interfaces. Its primary purpose is to provide navigation, position, heading, speed, depth, weather or traffic information according to the listed category. Radar, ECDIS, gyrocompass, speed log, GNSS and weather sensors use different principles, so model-specific calibration and interfaces must follow the approved documentation. The model designation identifies the listed configuration, but no additional meaning is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, iXBlue / Exail first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect sensors, antennas, transducers, cabling, power supplies, displays and data interfaces. Compare information with independent references and review alarm history. Verify distribution to dependent bridge systems. Refer to the manufacturer documentation for the exact figure for calibration, alignment and performance criteria.
Carry fuses, interface cables, approved power supplies, sensor or antenna parts and supported display or processor modules.
Free of charge — we forward your request to qualified suppliers for iXBlue / Exail equipment from our network of over 114,000 maritime companies.
Tell us what you need for this iXBlue / Exail Marins M8 — a part, a service call, a second opinion. Are you iXBlue / Exail? Claim this brand page.
Service engineer? Write the day report for this Marins M8 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.