Gyrocompass · Position & Heading
IXBlue / Exail ATLANS is a gyrocompass system (Position & Heading / Gyrocompass). It is normally installed in the bridge electronics or gyro room with repeaters distributed around the vessel. It is intended to provide a stabilized true-heading reference to the bridge and connected navigation systems. The meaning of any embedded size or rating code should be confirmed in manufacturer documentation. In service it interfaces with navigation sensors, bridge displays, ship power supply, data networks and alarms relevant to the equipment function.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Check power supplies, data interfaces, alarms, sensor health and agreement with independent navigation information where practical. Inspect external antennas, scanners or transducers as applicable and review fault logs and self-test results. Verify required backups, records and bridge procedures; exact calibration tolerances and test methods must follow manufacturer and statutory documentation.
Typical spares include approved fuses, cooling fans, display or keypad parts where supported, interface modules, data cables and selected sensor or antenna components according to the vessel's critical-spares policy.
Free of charge — send us your request for iXBlue / Exail equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, iXBlue / Exail first.
Tell us what you need for this iXBlue / Exail ATLANS — a part, a service call, a second opinion. Are you iXBlue / Exail? Claim this brand page.
Service engineer? Write the day report for this ATLANS in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.