"> Ocean Signal Ocean Signal EPIRB E101 Non-Hazmat Hydrostatic HRU
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Ocean Signal in the Maritime Network Find suppliers →
Ocean Signal

Ocean Signal EPIRB E101 Non-Hazmat Hydrostatic HRU

Ocean Signal Ocean Signal EPIRB E101 Non-Hazmat Hydrostatic HRU is listed as a SART / EPIRB (406 MHz) within the EPIRB category. It is typically installed on the bridge wing, monkey island, survival-craft station or other designated accessible emergency location depending on release arrangement. Its engineering role is to transmit a distress alert and identification signal for search-and-rescue response when activated. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

battery type Non-Hazmat
housing Hydrostatic HRU
solas approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Battery expiry or deterioration can reduce emergency transmission capability, found during service-date inspection or self-test
Damaged antenna or enclosure can impair transmission and watertight integrity
Hydrostatic release or bracket deterioration can prevent float-free deployment where fitted
Programming or registration mismatch can create incorrect identification data, found during authorized testing
Corroded contacts or water ingress can cause failed self-test or unreliable activation

Service & Maintenance

Inspect mounting, bracket or release unit, antenna, enclosure, labels and expiry/service dates and perform only the approved self-test procedure. Confirm beacon identity and registration records correspond to the vessel. Battery life, transmission tests and release-unit replacement criteria must follow manufacturer and statutory documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry only approved bracket/release items, seals or accessories permitted for onboard replacement; beacon battery and transmitter servicing should follow authorized-service requirements.
Equipment Model #135152 · ✓ still in production