Mooring Roller · Anchor & Mooring Equipment
Smith Berger SB Closed SWL-20t-B — Anchor & Mooring Equipment. As a Mooring Roller, it is normally installed at a mooring station on the forecastle, poop deck or vessel side where mooring lines pass between winches and shore. In that role, its primary purpose is to guide mooring rope or wire along the designed lead while limiting chafe and transferring line load into the deck structure. Roller fairleads provide moving contact surfaces, while Panama chocks provide a fixed shaped opening; both rely on sound structure and smooth line-contact surfaces. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect line-contact surfaces, rollers and pins where fitted, structural welds, deck foundations, corrosion and alignment with adjacent mooring equipment. Confirm moving rollers turn freely and remain lubricated. Pay particular attention to cracks or wastage in load-bearing structure. Refer to class and vessel documentation for the exact figure for allowable wear and design loads.
Carry pins, bushes, rollers or bearings where applicable, lubrication items and approved structural fasteners or repair material identified for the fitting.
Free of charge — send us your request for Smith Berger equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Smith Berger first.
Tell us what you need for this Smith Berger SB Closed SWL-20t-B — a part, a service call, a second opinion. Are you Smith Berger? Claim this brand page.
Service engineer? Write the day report for this SB Closed SWL-20t-B in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.