"> Allied Marine Crane Allied OC-40t
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Allied Marine Crane

Allied OC-40t

Allied Marine Crane Allied OC-40t is a shipboard unit in the Deck Cranes group, classified in the source as Offshore Crane. It is normally installed on exposed deck, cargo deck or offshore working deck with its pedestal connected to the vessel structure. Its primary duty is to lift stores, cargo, equipment or offshore loads within the crane's approved operating envelope. In service it interfaces with pedestal structure, hydraulic or electric drive, slew and hoist machinery, wire ropes, hook block, brakes, limit switches and load/safety controls. The source record states 40 t lifting capacity for this exact variant; this information is retained unchanged and distinguishes it from neighboring entries in the same product family. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

Allied Marine Crane Allied OC-40t

Components & Design

Component data being added…

Technical Data

lifting capacity t 40

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Wire-rope wear, corrosion or broken strands from fatigue and poor lubrication, typically indicated by visible rope damage, uneven winding or failed inspection
Hydraulic leakage or pressure loss from hoses, seals or valves, typically indicated by slow functions, drifting load or oil leakage
Brake or clutch wear, typically indicated by poor load holding, excessive stopping distance or abnormal heat
Slew/hoist bearing or gearbox wear from lubrication failure or overload, typically indicated by noise, backlash, vibration or overheating
Limit, overload or control-system fault, typically indicated by inhibited movement, incorrect indication or unsafe failure to stop at limits

Service & Maintenance

Inspect structure and pedestal, wire ropes, sheaves, hooks, brakes, hydraulic/electric drives, bearings, slew ring, lubrication, safety devices and certificates; load and function tests must follow approved class/manufacturer procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep wire-rope service items, hydraulic seals and hoses, brake parts, filters, limit switches, solenoid valves, contactors and critical control components.
Equipment Model #131986 · ✓ still in production