OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 128 verified suppliers & service companies for Furuno in the Maritime Network Find suppliers →
Furuno

NAVpilot 711C General Cargo

Furuno NAVpilot 711C General Cargo is identified in the source list as a autopilot system. It is installed on the bridge and connected to heading sensors, steering equipment and other navigation inputs required by the vessel's steering-control architecture. Its purpose is to control or assist vessel heading while retaining the required manual steering and changeover functions. The source record provides no additional model-specific operating figure beyond the listed designation and category. The exact control algorithms, rudder interfaces, displays, alarms and sensor inputs depend on the installed model and vessel configuration. The exact model designation and any vessel-type suffix distinguish control hardware and tuning context from neighboring systems; refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

vessel class General Cargo
adaptive True
imo compliant True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Heading-input failure caused by gyro, compass or network faults, resulting in alarms, unstable steering or loss of automatic mode
Steering-interface fault caused by wiring, actuator, solenoid or follow-up problems, resulting in poor rudder response or inability to control heading
Control-unit or display failure caused by power, hardware or software faults, resulting in frozen controls, resets or loss of function
Rudder-feedback error caused by sensor or linkage deterioration, resulting in hunting, incorrect rudder indication or steering instability
Power-supply or communication failure caused by breaker, converter, network or cabling faults, resulting in repeated alarms or system shutdown

Service & Maintenance

Verify valid heading and steering inputs and compare commanded behavior with actual rudder and vessel response using approved test procedures. Inspect bridge controls, power supplies, network interfaces and steering-control connections for faults or loose terminals. Function-test changeover between automatic and manual steering and confirm expected alarms following loss of an input. Check rudder feedback and heading offsets for consistency with independent indications. Back up configuration before approved software or hardware changes. Refer to the manufacturer documentation for the exact figure for adjustment, test and commissioning procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep fuses, control switches, selected interface or power-supply modules, rudder-feedback components and manufacturer-recommended electronic spares. Critical steering interfaces may justify replacement control units or sensors according to vessel redundancy. Preserve approved software and configuration data.
Equipment Model #131172 · ✓ still in production

Wer liefert dieses Teil? 178 Betriebe im Verzeichnis · 9 aus Herstellerlisten

Aqua Marine Electronics
Piraeus, Greece
✓ autorisiert
Avatec Marine BV
Dalweg 3B 3233 KK Oostvoorne Rotterdam, Netherlands
✓ autorisiert
Bluetek Supply
Miami, United States
✓ autorisiert
Furuno Italia S.r.l.
Gatteo, Italy
✓ autorisiert
HORA ELEKTRONIK d.o.o.
A.B. Simica 65, Croatia
✓ autorisiert
JN TAYLOR & CO. PTY LTD
Australia
✓ autorisiert
Lammers Schiffselektronik GmbH
Leer, Germany
✓ autorisiert
RADIO HOLLAND EGYPT
Alexandria, Egypt
✓ autorisiert
Alfa International (Marine Electronics)
Karachi, Pakistan
Marine Technics Baltia OÜ
Tallinn, Estonia
Navtronics
Marbella, Spain
Scan Marine Inc.
Tondo, Manila, Philippines
Weitere aus Hersteller- und Marktplatzverzeichnissen:
C. Sahamongkol Engineering Ltd., Part. · ThailandFuruno Danmark · DenmarkFuruno Norge A/S · NorwayMarine Communications MARCOM · Trinidad And TobagoOzsay Bulgaria Marine Electronics Ltd. · BulgariaProesa Electronica | Marine Electronics & Solutions · MexicoQueens Radio Electronics Marine Pte. Ltd. · Sri LankaMosaic Business Corporation · CameroonSeacom Marine (B) Sdn Bhd · Brunei Darussalam
Alle Betriebe für Furuno ansehen →