Odbiornik GPS · Pozycja i kurs
The Simrad HS80A is a marine satellite-navigation receiver. It is normally installed on the bridge with an external GNSS antenna. It is designed for position, time, course and speed data for navigation and other bridge systems. The operating principle relies on reception and processing of satellite navigation signals. Compared with neighbouring models, the relevant differences are supported constellations, display functions, interfaces and integrity monitoring; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on antenna/cabling, satellite tracking, position comparison, data outputs and alarms. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.
Masz kartę katalogową producenta dla tego modelu? Wyślij ją razem z formularzem zapytania — sprawdzimy ją i podamy źródło.
Zdjęcia, rysunki i podglądy stron z karty katalogowej tego modelu.
The Simrad HS80A and MX575D are IMO compliant D/GNSS compass solutions designed to provide heading, ROT, and position information to Simrad Autopilots and navigation systems.
Co nasza praca serwisowa i dokumentacja producenta mówią o utrzymaniu tego modelu w ruchu.
Verify the equipment against an independent navigation reference where practicable, inspect antennas/transducers, cables and power supplies, and confirm required sensor inputs and alarms. Check data distribution to dependent bridge equipment and review calibration, chart or configuration status appropriate to the device. Use vessel procedures and manufacturer tests for acceptance.
Carry fuses, connectors, selected power-supply and cooling parts, interface converters and manufacturer-recommended display/processor or sensor spares. Hull-mounted sensor replacement should be planned around the actual access arrangement.
Bezpłatnie — wyślij zapytanie dotyczące sprzętu Simrad. Nasz zespół je sprawdzi i odpowie e-mailem.
Inne modele tego samego typu sprzętu, najpierw Simrad.
Powiedz nam, czego potrzebujesz do tego Simrad HS80A — części, wizyty serwisowej, drugiej opinii. Czy jesteś Simrad? Przejmij tę stronę marki.
Serwisant? Napisz raport dzienny dla tego HS80A w OceanSphere Work — zdjęcia, godziny i części, jako PDF dla armatora. Wypróbuj 14 dni za darmo →
Tak. Dane techniczne, dokumenty i uwagi serwisowe tego modelu są dostępne bez konta. Konto dodaje zapisane wyszukiwania i zapytania, niczego nie odbiera.
Tak. Podaj producenta, model i czego potrzebujesz — każde zapytanie czyta człowiek i odpowiada e-mailem.
Wyślij nam tabliczkę lub prawidłową wartość. Sprawdzimy ją w karcie danych producenta lub rejestrze towarzystwa klasyfikacyjnego i zaktualizujemy stronę.