OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 6 verified suppliers & service companies for Dräger in the Maritime Network Find suppliers →
Dräger

Drager X-am 8000 LEL/O2/H2S/SO2

Dräger Drager X-am 8000 LEL/O2/H2S/SO2 is listed as a marine portable multi-gas detector in the Gas Detection / Portable Multi-Gas Detector category. Equipment of this class is typically installed at fixed sampling points or as a portable instrument carried into machinery, cargo, enclosed, or accommodation-adjacent spaces according to the detection duty. Its shipboard purpose is to warn personnel of hazardous gas concentrations, oxygen deficiency or enrichment, or combustible atmosphere conditions. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or other model-specific figure is supplied in the structured source data. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

gases LEL/O2/H2S/SO2
atex certified True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Sensor poisoning, ageing, contamination, or end-of-life degradation causes slow response, failed calibration, or drifting readings
Blocked sample line, filter, pump, or diffusion path prevents representative gas reaching the sensor and causes low or delayed readings
Battery, supply, charger, or internal power faults cause shutdown, short operating time, or power alarms
Water ingress, condensation, corrosion, or damaged connectors produce intermittent channels, false alarms, or failed communication
Calibration, configuration, relay, or control faults can cause nuisance alarms, missing alarms, or incorrect identification of the monitored point

Service & Maintenance

Inspect sensor condition, sampling paths and filters, pump operation where fitted, battery or power supply, alarms, relays, display, sampling-point identification, and calibration records. Perform bump tests and calibration only with approved gas and according to manufacturer and vessel safety procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep approved sensors or sensor cartridges, filters, pump or tubing service items, batteries or charging accessories, calibration fittings, and critical fuses or interface parts.
Equipment Model #130589 · ✓ still in production

Wer liefert dieses Teil? 20 Betriebe im Verzeichnis · 10 aus Herstellerlisten

West Sea
Viana do Castelo, Portugal
A 2 Z Ship Stores
Guindy North, India
Anchor Marine Equipment Company Llc
United Arab Emirates
Art Of Marine
Aşağimüslimler, Turkey
BOSSS MARINE NAMIBIA (PTY) LTD.
Allan Dean Martin Street, Namibia
Bronia Gmbh
Germany
Diving Consultancy
Germany
Dräger Nederland B.V.
Haarlem, Netherlands
Eastwind Safety Equipment Services
United Arab Emirates
Fristad Plast AB
Fristad, Sweden
Hansa Safety Services BV
Punteweg 16a, Netherlands
Intermarine LLC
New Orleans, United States
Weitere aus Hersteller- und Marktplatzverzeichnissen:
Draeger Sicherheitstechnik GmbH · GermanyDräger Marine & Offshore B.V. · NetherlandsGarant Global (acting as Garant Group) · LithuaniaKOMPRESSOR GROUP SRL · ItalyKONTES MARINE LP · GreeceMarahrens · GermanyMetromac Marine Automation · United Arab EmiratesOceanUs Korea · South KoreaResmar Ltd Leading supplies in fire and safety equipment · United KingdomTINO GENERAL ESSENTIAL LIMITED · Nigeria
Alle Betriebe für Dräger ansehen →