"> Sailor / Cobham SAILOR 6282 EPIRB Hydrostatic
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 27 verified suppliers & service companies for Sailor / Cobham in the Maritime Network Find suppliers →
Sailor / Cobham

SAILOR 6282 EPIRB Hydrostatic

Sailor / Cobham SAILOR 6282 EPIRB Hydrostatic — EPIRB / SART. The supplied category identifies the equipment as SART / EPIRB (406 MHz), and it is normally installed on or near the bridge and in survival-craft emergency equipment for rapid deployment during abandonment. In that listed role, its primary purpose is to help rescuers locate survival craft or persons after a distress event. Compared with an EPIRB, a SART or AIS-SART is principally a local locating aid for rescuers rather than the vessel's primary satellite distress-alerting beacon. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

solas approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Battery deterioration prevents reliable emergency endurance and is identified during inspection or self-test
Antenna damage or corrosion reduces transmission reliability and can cause failed self-test indication
Water ingress or damaged seals causes corrosion, intermittent operation or failure
Mounting, release or lanyard defects delay correct deployment or make the unit difficult to secure
Programming or registration mismatch results in incorrect vessel or beacon identity data

Service & Maintenance

Check mounting, accessibility, casing, antenna, labels and approved self-test indication. Verify battery and release-device validity against equipment records where applicable and confirm beacon identity and registration. Do not perform unauthorized live transmissions. Refer to manufacturer and regulatory documentation for the exact figure for test and replacement criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Maintain approved mounting and release hardware and arrange certified replacement batteries as required; minor spares may include seals, lanyards, brackets and fasteners where supported.
Equipment Model #129888 · ✓ still in production