HMW-50kN
Hatlapa HMW-50kN — Anchor & Mooring Equipment. It is normally installed on the forecastle, poop deck or offshore working deck aligned with the vessel's chain or line leads. Its primary purpose is to heave, veer, hold or control anchor chain, mooring line or anchor-handling wire according to the listed type. Windlasses, mooring winches, capstans and anchor-handling winches differ in line or chain handling and duty, but all require dependable brakes, drives and foundations. The model designation identifies the listed configuration, but no additional meaning is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect brakes, drums or wildcats, clutches, bearings, gearbox, foundation, drive system, controls and guards. Examine ropes, wires or chain and confirm safe spooling or engagement. Test local and remote controls and emergency functions under the approved vessel procedure. Refer to manufacturer and class documentation for the exact figure for pull, holding load, brake and wear limits.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →