Capstan · Anchor & Mooring Equipment
Hatlapa HKS-50kN — Anchor & Mooring Equipment. It is normally installed on the forecastle, poop deck or offshore working deck aligned with the vessel's chain or line leads. Its primary purpose is to heave, veer, hold or control anchor chain, mooring line or anchor-handling wire according to the listed type. Windlasses, mooring winches, capstans and anchor-handling winches differ in line or chain handling and duty, but all require dependable brakes, drives and foundations. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect brakes, drums or wildcats, clutches, bearings, gearbox, foundation, drive system, controls and guards. Examine ropes, wires or chain and confirm safe spooling or engagement. Test local and remote controls and emergency functions under the approved vessel procedure. Refer to manufacturer and class documentation for the exact figure for pull, holding load, brake and wear limits.
Carry brake parts, hydraulic seals and hoses, control-valve or contactor spares, lubrication items, clutch parts, sensors and line-termination hardware.
Free of charge — send us your request for Hatlapa equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Hatlapa first.
Tell us what you need for this Hatlapa HKS-50kN — a part, a service call, a second opinion. Are you Hatlapa? Claim this brand page.
Service engineer? Write the day report for this HKS-50kN in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.