OceanSphereENGINES
Library› Deck› Anchor & Mooring Equipment› Anchor Windlass› Rolls-Royce / Kongsberg RR AW-50kN

RR AW-50kN

Anchor Windlass · Anchor & Mooring Equipment

Class-certified type (DNV register) · technical data sheet not yet verified​‌⁠⁠​⁠⁠‍​‍⁠‍⁠‍​​​⁠​⁠

Rolls-Royce / Kongsberg RR AW-50kN — Anchor & Mooring Equipment. As an Anchor Windlass, it is normally installed on the forecastle, poop deck or another mooring station aligned with anchor chain or mooring line leads. In that role, its primary purpose is to heave, veer, hold and control anchor chain, rope or wire during anchoring and mooring operations. Windlasses are centered on chain handling through a wildcat or cable lifter, while mooring winches use rope or wire drums; both depend on brakes, clutches, gearboxes and reliable drive power. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Pull Force (kN)50
TypeHydraulic Anchor Windlass
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect brakes, drums or wildcats, clutches, bearings, gearbox, foundation, drive system, controls and guards. Examine rope, wire or chain condition and confirm safe spooling or engagement. Test local and remote controls and emergency functions under the approved vessel procedure. Refer to manufacturer and class documentation for the exact figure for pull, holding load, brake and wear limits.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry brake parts, hydraulic seals and hoses where applicable, control-valve or contactor spares, lubrication items, clutch parts, sensors and line-handling hardware.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Rolls-Royce / Kongsberg equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Anchor Windlass.

Other models of the same equipment type, Rolls-Royce / Kongsberg first.

By manufacturer Data HidrolikMacGregorHatlapaRolls-RoyceKarmoy WinchBrattvaagCSSCTowimorMaxwell MarineDMT MarineBeihai MarineRapp MarineAdria WinchDMC MarineSEC MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Rolls-Royce / Kongsberg models More like RR AW-50kN
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Rolls-Royce / Kongsberg RR AW-50kN — a part, a service call, a second opinion. Are you Rolls-Royce / Kongsberg? Claim this brand page.

Service engineer? Write the day report for this RR AW-50kN in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.