ZPMC-DC 150t
ZPMC ZPMC-DC 150t is a deck crane in the supplied category 'Deck Cranes / Deck Crane'. It is normally installed on deck at the cargo, stores or offshore handling station served by the crane. It is intended to lift and position loads within the crane's approved operating envelope. Compared with neighbouring entries in the same series, the supplied data identifies this variant by the source-listed characteristic 150 t lifting capacity. In service it interfaces with the pedestal and structure, slew and luffing mechanisms, hoist winch, wire rope, hook, hydraulic or electric drive, controls and safety devices. Model-specific limits, settings, dimensions and acceptance criteria that are not stated in the supplied data should be taken from the manufacturer documentation.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect structure, pedestal, welds, pins, sheaves, hook, wire rope, brakes, hydraulic hoses and leakage, and condition of electrical controls. Function-test emergency stop, limits, alarms and protective devices under the vessel's approved procedure. Review certification and load-test records; exact discard criteria, pressure settings and allowable wear must follow manufacturer, class and statutory documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →