"> JRC (Japan Radio Co) VR-3000
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
JRC (Japan Radio Co)

VR-3000

JRC (Japan Radio Co) VR-3000 — Navigation & Bridge Equipment. The supplied category identifies the equipment as Voyage Data Recorder (VDR), and it is normally installed on the bridge and in associated electronics spaces with inputs from navigation, audio, alarm and machinery systems and with protected recording storage. In that listed role, its primary purpose is to continuously capture selected voyage and bridge data for later investigation and regulatory review. A full VDR and simplified VDR differ in required input scope, but both depend on reliable data acquisition, time synchronization and protected recording. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

type S-VDR
imo compliant True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Sensor or interface failure causes missing channels, invalid data or system alarms
Microphone or audio-interface faults cause missing bridge or radio audio in the recording
Storage-media or protected-capsule faults cause recording alarms or gaps in retained data
Network, serial or power-supply faults cause intermittent acquisition, restart or loss of recording
Incorrect time synchronization or configuration causes misaligned or incorrectly identified recorded data

Service & Maintenance

Review built-in test status, channel health, time synchronization, microphones, power supply, UPS and recording storage. Confirm required bridge and navigation inputs are present without altering the approved configuration. Investigate any missing channels or repeated recording alarms. Refer to manufacturer and statutory documentation for the exact figure for retention, test and performance criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry power supplies, interface modules, microphones where supported, storage or recorder modules, fuses and backed-up approved configuration files.
Equipment Model #127553 · ✓ still in production