OceanSphereENGINES
Library› Navigation› Position & Heading› GPS Receiver› Kongsberg Maritime Seatex Seapath 380

Seatex Seapath 380

GPS Receiver · Position & Heading

Class-certified type (DNV register) · technical data sheet not yet verified​‌⁠⁠​​​‌⁠⁠​​⁠⁠‌‍​⁠⁠‌

It is normally installed on the bridge, mast or sensor deck, with repeaters and interfaces distributed to navigation systems. Its primary duty is to determine vessel position, heading or speed and provide this information to bridge and control systems. In service it interfaces with GNSS antennas, gyro/speed sensors, repeaters, radar, ECDIS, AIS, autopilot and navigation networks. Compared with neighboring entries in the same product family, this record is the exact Kongsberg Maritime Seatex Seapath 380 variant; the model designation should be quoted exactly when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Multi constellationYes
Heading accuracy deg0.02
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Check sensor health, antenna/mounting condition, power, interfaces, alarms and comparison with independent references; calibration/alignment should follow approved procedures and manufacturer data.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry critical power supplies, interface converters, antenna/cable components, display controls and sensor-specific service spares.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Kongsberg Maritime equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in GPS Receiver.

Other models of the same equipment type, Kongsberg Maritime first.

By manufacturer FurunoJRCKongsbergHemisphere GNSSSailorSimradAlphatronKoden ElectronicsTrimbleCobham SATCOMGarmin MarineVeratronConsilium MarineLeica GeosystemsLorenzAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Kongsberg Maritime models More like Seatex Seapath 380
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Kongsberg Maritime Seatex Seapath 380 — a part, a service call, a second opinion. Are you Kongsberg Maritime? Claim this brand page.

Service engineer? Write the day report for this Seatex Seapath 380 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.