OceanSphereDarmowe kontoZaloguj sięDEENPL
OceanSphereENGINES
Biblioteka› Navigation› Pozycja i kurs› Odbiornik GPS› Leica Geosystems MX521A
Leica Geosystems

MX521A

Odbiornik GPS · Pozycja i kurs

Typ z certyfikatem klasy (rejestr DNV) · karta techniczna jeszcze niesprawdzona

Leica Geosystems MX521A is a gps receiver. It is installed on the bridge and/or at the associated sensor location, with outputs distributed to other navigation equipment as required by the vessel. Its purpose is to provide the navigation measurement indicated by the equipment category for bridge use and connected systems. Sensor principle, correction methods, interfaces and redundancy depend on the exact model and vessel installation. The exact model designation distinguishes sensing technology, display functions and interfaces from neighboring navigation instruments; refer to the approved manufacturer documentation for the exact figures.

Dane techniczne

Dane techniczne.dane referencyjne — niezweryfikowane

Masz kartę katalogową producenta dla tego modelu? Wyślij ją razem z formularzem zapytania — sprawdzimy ją i podamy źródło.

DgpsYes
Jakość morskaYes
Serwis

Uwagi serwisowe.

Co nasza praca serwisowa i dokumentacja producenta mówią o utrzymaniu tego modelu w ruchu.

Compare the indicated value with independent references and investigate persistent disagreement rather than applying unrecorded corrections. Inspect sensors, antennas, transducers, cabling, power supplies, repeaters and network interfaces applicable to the installed equipment. Verify alarms and data outputs to radar, ECDIS, autopilot and voyage-data systems where connected. Keep calibration, deviation or configuration records current as appropriate to the sensor type. Protect exposed sensors and transducers from paint, deposits and water ingress. Refer to manufacturer and bridge-equipment documentation for exact test, calibration and alignment procedures.

Inspekcja

Typowe usterki i punkty kontrolne

Części zamienne

Części zamienne

Uwagi o częściach zamiennych

Keep fuses, lamps or display consumables, selected power-supply and interface modules, cables or connectors and manufacturer-recommended sensor service parts. Replacement core sensors, antennas or processors must remain compatible with the approved bridge installation. Preserve calibration and configuration data when changing equipment.

Potrzebujesz tej części?

Zapytaj o ofertę na ten model.

Bezpłatnie — wyślij zapytanie dotyczące sprzętu Leica Geosystems. Nasz zespół je sprawdzi i odpowie e-mailem.

Producenci i autoryzowani dystrybutorzy rzadko wyceniają sprzęt okrętowy bez danych statku. Dzięki nim szybciej sprawdzimy dostępność i ceny; bez nich być może najpierw musimy dopytać, a to może potrwać kilka dni. Jeśli nie możesz podać statku, tak samo pomoże zdjęcie tabliczki znamionowej — dołącz je poniżej lub odeślij w odpowiedzi na nasz e-mail potwierdzający.

Twoje dane kontaktowe nie są publikowane. Konto nie jest wymagane.
Powiązane modeli

Także w Odbiornik GPS.

Inne modele tego samego typu sprzętu, najpierw Leica Geosystems.

Według producenta FurunoJRCKongsbergHemisphere GNSSSailorSimradAlphatronKoden ElectronicsTrimbleCobham SATCOMGarmin MarineVeratronConsilium MarineLeica GeosystemsLorenzWszyscy producenciCzęści według urządzeńNowy użytkownik? Załóż darmowe konto Nieczytelna tabliczka? Wypróbuj skaner tabliczek Podobne do MX521A
Chcesz wiedzieć więcej?

Każde zapytanie czyta człowiek i odpowiada e-mailem.

Powiedz nam, czego potrzebujesz do tego Leica Geosystems MX521A — części, wizyty serwisowej, drugiej opinii. Czy jesteś Leica Geosystems? Przejmij tę stronę marki.

Serwisant? Napisz raport dzienny dla tego MX521A w OceanSphere Work — zdjęcia, godziny i części, jako PDF dla armatora. Wypróbuj 14 dni za darmo →

Często pytane

Trzy pytania, które padają najpierw.

Czy dane tego modelu są bezpłatne?

Tak. Dane techniczne, dokumenty i uwagi serwisowe tego modelu są dostępne bez konta. Konto dodaje zapisane wyszukiwania i zapytania, niczego nie odbiera.

Czy znajdziecie część dokładnie do tego modelu?

Tak. Podaj producenta, model i czego potrzebujesz — każde zapytanie czyta człowiek i odpowiada e-mailem.

Dane techniczne wydają się błędne — co teraz?

Wyślij nam tabliczkę lub prawidłową wartość. Sprawdzimy ją w karcie danych producenta lub rejestrze towarzystwa klasyfikacyjnego i zaktualizujemy stronę.