GPS Receiver · Position & Heading
The Furuno GP-150D is a marine satellite-navigation receiver. It is normally installed on the bridge with an external GNSS antenna. It is designed for position, time, course and speed data for navigation and other bridge systems. The operating principle relies on reception and processing of satellite navigation signals. Compared with neighbouring models, the relevant differences are supported constellations, display functions, interfaces and integrity monitoring; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on antenna/cabling, satellite tracking, position comparison, data outputs and alarms. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
Photos, drawings and page previews from this model’s datasheet or catalog.
The Furuno GP-150D is a GPS receiver used for navigation and positioning on vessels.
What our service work and the manufacturer documentation say about keeping this model running.
Verify the equipment against an independent navigation reference where practicable, inspect antennas/transducers, cables and power supplies, and confirm required sensor inputs and alarms. Check data distribution to dependent bridge equipment and review calibration, chart or configuration status appropriate to the device. Use vessel procedures and manufacturer tests for acceptance.
Carry fuses, connectors, selected power-supply and cooling parts, interface converters and manufacturer-recommended display/processor or sensor spares. Hull-mounted sensor replacement should be planned around the actual access arrangement.
Free of charge — send us your request for Furuno equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Furuno first.
Tell us what you need for this Furuno GP-150D — a part, a service call, a second opinion. Are you Furuno? Claim this brand page.
Service engineer? Write the day report for this GP-150D in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.