"> MAN Energy Solutions 16V35/44DF-GS-60Hz
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 5 verified suppliers & service companies for MAN Energy Solutions in the Maritime Network Find suppliers →
Is MAN Energy Solutions your company? Claim this page
MAN Energy Solutions

16V35/44DF-GS-60Hz

The MAN 16V35/44DF‑GS‑60Hz is a high‑power V‑type 16‑cylinder, four‑stroke dual‑fuel (LNG/HFO) auxiliary engine coupled to a generator set delivering up to 8 200 kW at 60 Hz, designed for flexible fuel use and low emissions.

MAN Energy Solutions 16V35/44DF-GS-60Hz
8640.0 kW
Power

Engine Specifications

16
Cylinders
350 mm
Bore
440 mm
Stroke
4-stroke
Stroke Type

Components & Design

Component data being added…

Technical Data

Displacement per cylinder 42.3 liters
Power per cylinder @ 750 rpm 530 kW (L35/44DF standard); 560 kW (L35/44DF CD)
MEP (Mean Effective Pressure) 20.0–20.1 bar
SFOC liquid fuel @ 85% MCR 175.5 g/kWh
SFC gas operation 7440 kJ/kWh
Dry mass – 6L/7L/8L/9L/10L 40.5 / 45.6 / 50.7 / 55.0 / 59.7 tonnes
Methane slip reduction (CD variant) 85% vs. industry standard
Emissions compliance IMO Tier II (diesel) / Tier III (gas)
power kw 8640
rpm 900
fuel type LNG/HFO (Dual-Fuel)
configuration V
genset kw 8208
genset kva 10260
frequency hz 60

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Methane slip via scavenging leakage – unburned methane escapes to exhaust when gas injection occurs before exhaust valve closure; mitigated in CD variant via op

Monitor exhaust methane concentrations; inspect valve timing; verify adaptive combustion control (ACC) system calibration

Combustion instability at low load (<0% MCR) in gas mode – risk of pre-ignition, knocking, and transient power loss during load fluctuations or fuel-quality var

Review engine load profiles during dredger/auxiliary duty; check fuel-gas methane number (spec ≥70 MN); monitor combustion pressure transients

Crankcase explosion hazard during transient operation – accumulation of unburned gas and oil mist in crankcase when switching fuels or under rapid load changes;

Inspect crankcase ventilation filter; check scavenging air receiver for oil/liquid accumulation; monitor crankcase pressure during fuel transitions

Fuel injection nozzle/pilot-fuel system fouling – common-rail pilot-fuel system susceptible to coke deposit buildup and relief-valve drift under variable dual-f

Periodic fuel nozzle inspection; relief valve pressure setting verification; fuel system cleanliness monitoring

Turbocharger bearing accelerated wear under rapid load transients – MAN documentation acknowledges the 35/44DF 'handles high load-fluctuations' in dredger duty,

Monitor turbocharger oil outlet temperature; inspect bearing clearance during scheduled maintenance; verify steady oil-supply pressure under transient load

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for MAN Energy Solutions?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #125089 · ✓ still in production