"> Wärtsilä 6LW32-GS-60Hz
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 65 verified suppliers & service companies for Wärtsilä in the Maritime Network Find suppliers →
Wärtsilä

6LW32-GS-60Hz

The Wärtsilä 6LW32‑GS‑60Hz is a medium‑speed, inline 6‑cylinder diesel generator set delivering up to 1 981 kW (2 351 kVA) at 900 rpm for shipboard auxiliary power.

Wärtsilä 6LW32-GS-60Hz
1980.0 kW
Power

Engine Specifications

6
Cylinders
320 mm
Bore
400 mm
Stroke
4-stroke
Stroke Type

Components & Design

Component data being added…

Technical Data

Displacement per cylinder 32.2 liters
Specific power output (inline) 580 kW/cylinder (at 750 RPM)
Specific power output (V-config) 500-420 kW/cylinder (W32GD: 405-420 kW/cyl)
Configuration 4-stroke, non-reversible, turbocharged, intercooled, direct fuel injection
Valves per cylinder 2 inlet + 2 exhaust
Cooling system Seawater and freshwater cooling; charge air cooling via cooler
Turbocharger Napier 357 (common); Wärtsilä turbocharger safety package available
Compliance IMO Tier II (MARPOL 73/78 Annex VI)
power kw 1980
rpm 900
fuel type HFO/MDO
configuration L
genset kw 1881
genset kva 2351
frequency hz 60

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Injection pump fuel rack stickiness (HFO operation) - reported in power plants using HFO 380, affecting reliable fuel delivery
Exhaust valve seat wear and carbon deposits - standard maintenance item due to high exhaust temperatures; valve seats made from Ni-Cr super alloy (ASTM A560 60C
Camshaft gear backlash and timing gear pitting/spalling - wear surfaces require monitoring during major overhauls
Bearing shell installation alignment critical - tin-aluminium-on-chrome-iron tribological pairing; 110% overload limit for 1 hour in 12
Fuel injection nozzle clogging (dirt/debris, contaminated fuel) - HFO installations use oil-cooled nozzles; MDF uses non-cooled nozzles

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #124657 · ✓ still in production