"> ENWA Marine UV-1 Marine
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 33 verified suppliers & service companies for ENWA Marine in the Maritime Network Find suppliers →
ENWA Marine

UV-1 Marine

ENWA Marine UV-1 Marine is a marine ultraviolet water sterilizer. It is normally installed in a potable-water or process-water line downstream of filtration and upstream of the protected distribution or storage point. Its primary purpose is to disinfect flowing water by exposing it to ultraviolet radiation. Compared with chemical dosing, UV treatment adds no disinfectant residual and therefore depends directly on lamp condition, quartz cleanliness and water clarity. The supplied record already contains the available concise model or rating information, so those existing figures are not duplicated here and no additional meaning is inferred from the model code. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

capacity m3h 1
treatment type UV Sterilization
uv dose mj cm2 40

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Lamp ageing or failure reduces UV output and produces lamp or intensity alarms
Quartz-sleeve fouling reduces transmitted UV energy and causes low-intensity indication
Ballast, power-supply or control faults cause lamp failure or system shutdown
Flow above the validated condition or poor water clarity reduces effective disinfection without obvious mechanical failure
Seal leakage around quartz sleeves causes water leakage into electrical areas

Service & Maintenance

Inspect lamp status, quartz sleeves, seals, intensity monitor, power supply and flow arrangement. Clean sleeves with approved methods and verify alarm functions. Ensure upstream filtration is maintained. Exact UV dose, lamp replacement and flow criteria require manufacturer documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry UV lamps, quartz sleeves, seals, ballasts or power supplies, fuses and approved cleaning materials.
Equipment Model #113360 · ✓ still in production