"> ENWA Marine PW UV Disinfection 15m3h Marine
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 23 verified suppliers & service companies for ENWA Marine in the Maritime Network Find suppliers →
Is ENWA Marine your company? Claim this page
ENWA Marine

PW UV Disinfection 15m3h Marine

ENWA Marine PW UV Disinfection 15m3h Marine is identified in the source list as a potable-water ultraviolet disinfection unit. It is installed in the freshwater or sanitary-service system between storage, treatment and accommodation distribution according to the vessel's piping arrangement. Its purpose is to disinfect flowing potable water using ultraviolet radiation before distribution or storage. The source record provides no additional model-specific operating figure beyond the listed designation and category. Pumps, pressure vessels, filters, treatment elements, ultraviolet lamps, dosing or control components may be included depending on the exact system. The exact model designation and any source-listed capacity distinguish treatment or pressure-set configuration from neighboring potable-water units; refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

capacity lpd 15000
treatment type UV Disinfection

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Loss of pressure or treatment performance caused by pump, filter, lamp, media or control faults, resulting in poor water supply or inadequate treatment indication
●Sensor or monitoring fault caused by fouling, calibration drift or wiring problems, resulting in implausible pressure or water-quality readings
●Valve or non-return-valve failure caused by wear, scale or contamination, resulting in pressure loss, backflow or unstable pump cycling
●Leakage caused by seal, housing, pressure-vessel or piping deterioration, resulting in water loss and wet equipment spaces
●Control or power failure caused by electrical faults, loose connections or failed relays, resulting in inability to maintain treatment or distribution

Service & Maintenance

Inspect pumps, pressure vessel, filters, treatment elements, lamps, valves, sensors and sample points applicable to the installed system. Maintain hygienic conditions during any opening of potable-water equipment and prevent cross-contamination from tools or chemicals. Trend pressure, pump cycling and water-quality indications and investigate abnormal values promptly. Verify alarms and automatic changeover or shutdown functions after maintenance. Check approved treatment consumables and pressure-vessel condition as applicable. Refer to the manufacturer documentation for the exact figure for pressure settings, lamp replacement, dosing and water-quality limits.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep pump seals, filters, approved treatment media or lamps as applicable, pressure switches or sensors, valves and manufacturer-recommended control components. Chemicals and wetted parts must be approved for potable-water service. Confirm all replacement parts against the exact unit and process configuration.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for ENWA Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #114355 · ✓ still in production