Pressure/Vacuum Relief Valve (PV Valve) · PV Valves & Vent Systems
It is normally installed on cargo tank vent risers and vent headers on tanker decks. Its primary duty is to control cargo-tank pressure and vacuum and provide a safe discharge path for vapour while maintaining tank protection. In service it interfaces with cargo tank vent piping, mast risers, flame screens or arresting arrangements where fitted, pressure monitoring and inert-gas/cargo systems. Compared with neighboring entries in the same product family, this record is the exact Pres-Vac PV Valve DN50 2100mbar variant; the model designation should be quoted exactly when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect cleanliness, free movement, seats, seals, drains, flame screens and vent piping; verify calibration/bench-test status under approved procedures and refer to manufacturer documentation for exact opening settings.
Carry approved seals, gaskets, seat components, springs or service kits where applicable, drain parts and replacement screens compatible with the fitted valve.
Free of charge — send us your request for Pres-Vac equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Pres-Vac first.
Tell us what you need for this Pres-Vac PV Valve DN50 2100mbar — a part, a service call, a second opinion. Are you Pres-Vac? Claim this brand page.
Service engineer? Write the day report for this PV Valve DN50 2100mbar in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.