Electrochlorination BWMS · Ballast Water Treatment Systems
Cathelco EC BWMS 100m3h BV-approved — 3.0 kW, 100 m³/h capacity. The supplied category identifies the equipment as Electrochlorination BWMS, and it is normally installed in the ballast-water piping system between sea chests, ballast pumps and tanks, with filters, treatment reactors, dosing or neutralization equipment as applicable. In that listed role, its primary purpose is to treat ballast water during uptake or discharge so the vessel can meet the approved ballast-water management standard. UV, electrochlorination, electrolysis and filter-plus-UV systems differ in treatment mechanism, but all depend on correct flow, sensor condition and functioning bypass or interlock logic. Within the supplied list, this variant is distinguished from neighbouring entries by its model designation and the explicitly listed power; further hardware differences are not stated in the source. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Cathelco first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect filters, UV reactors or electrolysis cells, pumps, valves, analyzers, flowmeters, dosing or neutralization equipment and control logs. Review alarms and treatment records and confirm bypass arrangements remain controlled. Clean and calibrate process sensors using approved procedures. Refer to the manufacturer and type-approval documentation for the exact figure for dose, intensity, flow and water-quality limits.
Carry filter elements or screen service parts, UV lamps or electrode components as applicable, analyzer consumables, sensors, pump seals, solenoid valves and approved treatment chemicals where used.
Free of charge — we forward your request to qualified suppliers for Cathelco equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Cathelco EC BWMS 100m3h BV-approved — a part, a service call, a second opinion. Are you Cathelco? Claim this brand page.
Service engineer? Write the day report for this EC BWMS 100m3h BV-approved in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.