Flue Gas Inert Gas Generator · Inert Gas Systems
SAACKE IG Generator 4000m3h O2<1% combustion is a flue gas inert gas generator. It is installed in the tanker inert-gas or nitrogen plant and connected to the cargo-tank gas distribution system. Its purpose is to generate, clean or condition low-oxygen gas for cargo-tank inerting and atmosphere control according to the installed process. Gas-generation, scrubbing or membrane or PSA stages, blowers, valves, analyzers, drying and control interlocks form the process according to the exact design. The exact model designation distinguishes gas capacity, process method and purity from neighboring inert-gas or nitrogen units; refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect process vessels, scrubbers, membranes or adsorbers, fans or compressors, valves, analyzers and pressure-control equipment. Remove soot or deposits and maintain free drainage where wet gas treatment is used. Verify oxygen or process analyzers using the approved calibration method and keep sampling lines clean. Function-test alarms, automatic shutdowns and deck-isolation arrangements as required by vessel procedures. Inspect corrosion-prone wet sections and pressure vessels closely. Refer to the manufacturer documentation for the exact figure for oxygen, purity, pressure, temperature and maintenance limits.
Keep filter or demister elements, fan or compressor seals and bearings, valve service kits, analyzer cells or sensors, gaskets and manufacturer-recommended control spares. Membrane or adsorbent replacement should follow the exact process design. Confirm materials are compatible with the installed gas service.
Free of charge — send us your request for SAACKE equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, SAACKE first.
Tell us what you need for this SAACKE IG Generator 4000m3h O2<1% combustion — a part, a service call, a second opinion. Are you SAACKE? Claim this brand page.
Service engineer? Write the day report for this IG Generator 4000m3h O2<1% combustion in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.