Flue Gas Inert Gas Generator · Inert Gas Systems
SAACKE IG Generator 500m3h O2<0.5% flue gas — 500 m³/h capacity. The supplied category identifies the equipment as Flue Gas Inert Gas Generator, and it is normally installed in the tanker cargo-support machinery system with fans, generators or membranes, scrubbers where fitted, analyzers and deck distribution piping. In that listed role, its primary purpose is to supply gas with controlled oxygen content for cargo-tank inerting, purging or pressure management. Flue-gas, PSA and membrane systems use different gas-generation principles, so oxygen control, pretreatment and machinery service points differ. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, SAACKE first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect gas-generation equipment, blowers or compressors, filters or scrubbers, analyzers, valves, drains and control interlocks. Trend oxygen quality and flow and verify deck isolation and non-return arrangements according to the approved cargo procedure. Calibrate analyzers using approved methods. Refer to the manufacturer and vessel documentation for the exact figure for oxygen, pressure, flow and service limits.
Carry analyzer cells or consumables, filters, blower or compressor service parts, valve and seal kits, sensors and control relays.
Free of charge — we forward your request to qualified suppliers for SAACKE equipment from our network of over 114,000 maritime companies.
Tell us what you need for this SAACKE IG Generator 500m3h O2<0.5% flue gas — a part, a service call, a second opinion. Are you SAACKE? Claim this brand page.
Service engineer? Write the day report for this IG Generator 500m3h O2<0.5% flue gas in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.