"> Hamworthy/Wärtsilä VG-1000/130m SS316
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 6 verified suppliers & service companies for Hamworthy/Wärtsilä in the Maritime Network Find suppliers →
Hamworthy/Wärtsilä

VG-1000/130m SS316

Hamworthy/Wärtsilä VG-1000/130m SS316 is a shipboard unit in the Tanker Cargo Systems group, classified in the source as Submerged Cargo Pump. It is normally installed in cargo tanks, pump rooms, deck manifolds, cargo heating circuits or cargo vent systems depending on the component. Its primary duty is to control, transfer, strip, heat or safely vent tanker cargo while maintaining containment and operational control. In service it interfaces with cargo piping, valves, tank instrumentation, hydraulic/electric drives, stripping lines, heating medium, ESD functions and cargo control systems. Compared with neighboring entries in the same product family, this record is the exact Hamworthy/Wärtsilä VG-1000/130m SS316 variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

flow rate m3h 1000
head m 130
cargo type product
material SS316

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Seal or packing leakage from wear, chemical attack or misalignment, typically indicated by visible cargo leakage, odor or pressure loss
Valve or pump internal wear from solids, cavitation or corrosive cargo, typically indicated by reduced transfer rate, abnormal noise or poor shutoff
Drive, hydraulic or electrical fault from contamination, overheating or control failure, typically indicated by slow response, inability to operate or trip alarms
Blocked suction, stripping or vent path from sediment, icing or debris, typically indicated by poor cargo flow, abnormal tank pressure or incomplete stripping
Instrumentation or remote-control failure from sensor, cabling or actuator faults, typically indicated by incorrect indication, failed remote operation or alarm discrepancies

Service & Maintenance

Inspect containment, seals, valves, pumps or vent components as applicable, verify remote controls and ESD interfaces, review leakage and alarm history, and confirm cargo compatibility; exact pressure, temperature and test criteria must come from approved manufacturer and vessel documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry seals, gaskets, packing, actuator seal kits, critical sensors/switches and approved valve or pump wear parts matched to the installed cargo service.
Equipment Model #97584 · ✓ still in production