"> Hyde/Calgon InvaSave 150m3h
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 13 verified suppliers & service companies for Hyde/Calgon in the Maritime Network Find suppliers →
Is Hyde/Calgon your company? Claim this page
Hyde/Calgon

InvaSave 150m3h

Hyde/Calgon InvaSave 150m3h is listed as a marine electrochlorination bwms in the Ballast Water Treatment Systems / Electrochlorination BWMS category. Equipment of this class is typically installed in the shipboard area serving the ballast water treatment systems function, with the exact location determined by the vessel arrangement. Its shipboard purpose is to perform the operational duty associated with the vessel's electrochlorination bwms installation. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. The structured source data lists the following model-specific information: Leistung (kW) is listed as 4.5. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

4.5 kW
Power

Components & Design

Component data being added…

Technical Data

capacity m3h 150
treatment method Electrochlorination
imo type approved True
uscg approved True
power kw 4.5

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Loss of electrical, hydraulic, pneumatic, fluid, or other service supply from a protection trip, leakage, blockage, or upstream fault results in failed starting or loss of function
●Mechanical wear, corrosion, fouling, or contamination of moving and wetted parts causes increased noise, leakage, sticking, vibration, or reduced performance
●Seal, gasket, hose, cable, or connection deterioration from age, heat, vibration, or environmental exposure produces visible leakage, intermittent signals, or loss of pressure
●Sensor, switch, actuator, relay, or control-system faults cause incorrect indication, nuisance alarms, failed automatic sequences, or loss of remote control
●Incorrect adjustment, assembly, or maintenance leads to unstable operation, recurrent alarms, or performance that differs from the vessel's normal baseline

Service & Maintenance

Inspect the unit for leakage, corrosion, contamination, loose connections, abnormal noise or vibration, condition of guards and mountings, service supplies, controls, alarms, and functional performance. Use maintenance history to identify deterioration trends and refer to manufacturer documentation for exact settings, tolerances, test values, and overhaul criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep the manufacturer-recommended seals and gaskets, filters where fitted, fuses or protection items, common sensors and switches, and critical actuator, control, or wear components appropriate to the installed configuration. Exact part numbers and quantities must come from the manufacturer spare-parts documentation.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Hyde/Calgon?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #94757 · ✓ still in production