"> Parker Hannifin Marine N2 Membrane N2-2000 99.5%
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 4 verified suppliers & service companies for Parker Hannifin Marine in the Maritime Network Find suppliers →
Is Parker Hannifin Marine your company? Claim this page
Parker Hannifin Marine

N2 Membrane N2-2000 99.5%

Parker Hannifin Marine N2 Membrane N2-2000 99.5% is identified in the source list as a nitrogen generator (membrane). It is normally installed or arranged in the tanker inert-gas or nitrogen plant. Its purpose is to generate or condition low-oxygen gas for cargo-tank atmosphere control. The source record provides the existing record note '22000 m³/h capacity'. The equipment is based on gas-generation or treatment stages, blowers, valves, analyzers and controls. The exact model designation distinguishes the installed configuration from neighboring variants in the same category; refer to the manufacturer documentation for the exact figure.

Parker Hannifin Marine N2 Membrane N2-2000 99.5%

Components & Design

Component data being added…

Technical Data

capacity m3h 22000
o2 content percent 0.5
dew point c -40
ig type membrane N2

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Seal, gasket or process-connection leakage caused by wear, thermal cycling, corrosion or cargo incompatibility, resulting in cargo or vapor leakage
●Valve, actuator, pump or drive failure caused by sticking, wear, electrical or hydraulic faults, resulting in incorrect routing or reduced cargo-handling capacity
●Sensor or measuring-element fouling or drift caused by cargo deposits, contamination or calibration error, resulting in implausible readings or alarms
●Process fouling, icing or blockage caused by cargo residue, temperature conditions or debris, resulting in restricted flow or unstable operation
●Control, shutdown or hazardous-area electrical fault caused by wiring, electronics or configuration problems, resulting in unavailable remote operation or protective trips

Service & Maintenance

Inspect process connections, seals, valves, actuators, pumps, sensors, piping and supports applicable to the listed cargo equipment. Maintain material compatibility with the actual cargo and clean deposits before they restrict movement or measurement. Trend pressure, temperature, level, flow or operating response against established normal conditions. Function-test remote controls, alarms, shutdowns and emergency stops before cargo operations. Inspect hazardous-area electrical and bonding arrangements for integrity. Refer to the manufacturer documentation for the exact figure for cargo compatibility, calibration, operating limits and wear criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep cargo-compatible seals and gaskets, valve service kits, sensors, cable glands, pump or actuator parts and manufacturer-recommended process components. Replacement materials must match the certified cargo service and hazardous-area approval.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Parker Hannifin Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #94501 · ✓ still in production