"> DESMI Cargo DSLP-1000/140m product
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
DESMI Cargo

DSLP-1000/140m product

DESMI Cargo DSLP-1000/140m product is listed as a marine submerged cargo pump in the Tanker Cargo Systems / Submerged Cargo Pump category. Equipment of this class is typically installed in or adjacent to cargo tanks, pump rooms, cofferdams, or dedicated cargo machinery spaces depending on the pump arrangement. Its shipboard purpose is to transfer, strip, or circulate liquid cargo between tanks, shore connections, and cargo-processing equipment. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or other model-specific figure is supplied in the structured source data. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

flow rate m3h 1000
head m 140
cargo type product
material SS316

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Loss of suction from low tank level, vapor ingestion, blocked suction, or incorrect valve line-up causes cavitation, low discharge pressure, or loss of flow
Seal, bearing, shaft, impeller, hydraulic-drive, or electric-motor wear causes leakage, vibration, noise, or reduced capacity
Cargo deposits, corrosion, or foreign material restrict internal passages and reduce pump performance
Drive, hydraulic power, electrical protection, or control faults cause failed starting, trips, or unstable speed
Dry running, inadequate cooling, or operation outside the approved envelope causes rapid wear, overheating, or protective shutdown

Service & Maintenance

Check cargo compatibility, suction and discharge conditions, leakage, vibration, drive-system condition, bearings, seals, stripping performance, controls, emergency stops, and alarm history. Internal clearances and performance limits must be taken from manufacturer documentation and cargo-system procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Typical spares include seals, gaskets, bearings, wear components, hydraulic seal items where fitted, motor or starter parts, and critical sensors or control components specified by the manufacturer.
Equipment Model #94046 · ✓ still in production