"> Pauluhn/Crouse-Hinds A55 LED 60W IP55 4000K
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Pauluhn/Crouse-Hinds

A55 LED 60W IP55 4000K

Pauluhn/Crouse-Hinds A55 LED 60W IP55 4000K — Lighting. The supplied category identifies the equipment as Explosion-Proof Light, and it is normally installed in accommodation, machinery, deck or hazardous spaces according to the vessel lighting plan and the fitting's approved enclosure. In that listed role, its primary purpose is to provide fixed, emergency, navigation or work illumination according to the listed type. LED, floodlight, emergency and explosion-protected fittings differ in optics, supply and enclosure requirements, so replacement components must match the approved fitting. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

wattage w 60
lumen 6300
ip rating IP55
zone safe area
color temp k 4000
light type LED

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Lamp, LED module or driver failure causes complete loss of light, reduced output or flicker
Water ingress through damaged seals or glands causes corrosion, intermittent operation or earth faults
Heat buildup or failed thermal management causes reduced output, discoloration or early electronic failure
Loose terminals or degraded cabling causes flicker, local overheating or loss of supply
Lens contamination, yellowing or mechanical damage reduces useful illumination and can compromise the enclosure

Service & Maintenance

Inspect housing, lens, seals, cable glands, mounting, terminals and signs of overheating or moisture. Verify correct operation from normal and emergency supplies where applicable. Maintain hazardous-area or weatherproof enclosure integrity and keep optical surfaces clean. Refer to the manufacturer documentation for the exact figure for electrical and enclosure requirements.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry complete replacement fittings or approved lamp, LED and driver modules, seals, cable glands, fuses, terminal parts and mounting hardware.
Equipment Model #93141 · ✓ still in production