Power Cable (0.6/1 kV) · Cable & Wiring
LS Cable DPYC 1Cx25mm2 0.6/1kV is listed in the source as a marine 1 kV) within the Cable & Wiring group. Equipment of this type is typically installed through cable trays, trunks, penetrations and local equipment runs between switchboards, control panels, machinery and accommodation or safety systems. Its primary duty is carrying electrical power, control or communication signals for the service represented by the 1 kV), and it depends on conductor continuity, insulation integrity, correct termination, mechanical protection and approved fire or voltage characteristics remaining intact. The supplied entry records 25 mm² cross-section; these stated values should be retained when the unit is identified or compared with neighboring variants. It normally interfaces with switchboards, junction boxes, glands, penetrations, terminals, equipment enclosures and bonding or shielding arrangements as applicable. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, LS Cable first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect routing, supports, bend areas, glands, penetrations, terminations and visible sheath condition. Test insulation, continuity or shielding only with methods suitable for the connected equipment and isolate sensitive electronics as required. Verify cable type and fire-stop restoration against approved drawings and manufacturer documentation.
Maintain approved cable lengths or repair material where the vessel's strategy requires them, together with correct glands, lugs, ferrules, identification sleeves, clips and certified penetration-sealing materials.
Free of charge — we forward your request to qualified suppliers for LS Cable equipment from our network of over 114,000 maritime companies.
Tell us what you need for this LS Cable DPYC 1Cx25mm2 0.6/1kV — a part, a service call, a second opinion. Are you LS Cable? Claim this brand page.
Service engineer? Write the day report for this DPYC 1Cx25mm2 0.6/1kV in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.