Variable Frequency Drive (VFD) / Frequency Converter · Frequency Converters & Drives
Siemens Marine SINAMICS G120 15kW 690V Marine is listed in the source as a marine Frequency Converter within the Frequency Converters & Drives group. Equipment of this type is typically installed in an electrical room, switchboard, motor-control centre or dedicated cabinet serving the connected shipboard load. Its primary duty is electrical power conversion, switching, protection or energy management associated with the Frequency Converter, and it depends on healthy incoming power, protection devices, internal power electronics or contactors, control logic, cooling and correctly terminated outgoing circuits. The supplied entry records rated power 15.0 kW; these stated values should be retained when the unit is identified or compared with neighboring variants. It normally interfaces with the vessel distribution system, connected motors or loads, control and alarm networks, protection circuits and cooling or ventilation arrangements. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Siemens Marine first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect for heat damage, loose connections, contamination, blocked cooling paths and abnormal component noise or smell. Review alarm history, protection settings and measured electrical condition using the vessel's approved procedures, and verify communication with the connected control system. Do not change protection or drive parameters without the approved record; refer to manufacturer documentation for exact values.
Common critical spares include fuses, cooling fans, filters, contactors, control relays, interface modules, power-supply boards and maker-approved battery or electronic modules according to the installed equipment and vessel strategy.
Free of charge — we forward your request to qualified suppliers for Siemens Marine equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Siemens Marine SINAMICS G120 15kW 690V Marine — a part, a service call, a second opinion. Are you Siemens Marine? Claim this brand page.
Service engineer? Write the day report for this SINAMICS G120 15kW 690V Marine in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.