OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Electrical› Power Generation› Marine Generator / Alternator› Stamford/Cummins PI7 1250kVA 690V 50Hz

PI7 1250kVA 690V 50Hz

Marine Generator / Alternator · Power Generation

Class-certified type (DNV register) · technical data sheet not yet verified

Stamford/Cummins PI7 1250kVA 690V 50Hz is listed as a Marine Generator / Alternator within the Power Generation category. It is typically installed in the engine room or generator room, coupled to a prime mover and connected to the vessel’s main or emergency electrical distribution system. Its engineering role is to convert mechanical shaft power into electrical power for shipboard consumers. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

Power (kVA)1250
Frequency (Hz)50
Poles4
EnclosureIP23
Insulation ClassH
Related models

Also in Marine Generator / Alternator.

Other models of the same equipment type, Stamford/Cummins first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Inspect windings, terminals, bearings, cooling passages, excitation equipment and protective devices. Review insulation condition, vibration and temperature trends and verify stable voltage under normal operating conditions. Electrical test limits and bearing criteria must follow manufacturer documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry maker-recommended AVR/excitation parts, fuses, sensors, brushes where applicable, bearing-related service items and common terminal or cooling-system consumables.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for Stamford/Cummins equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMICarrier MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Stamford/Cummins models More like PI7 1250kVA 690V 50Hz
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this Stamford/Cummins PI7 1250kVA 690V 50Hz — a part, a service call, a second opinion. Are you Stamford/Cummins? Claim this brand page.

Service engineer? Write the day report for this PI7 1250kVA 690V 50Hz in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.