"> Colorlight CL Series
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Colorlight

CL Series

The Colorlight CL Series Aldis lamp is a SOLAS‑required visual signaling device that emits high‑intensity LED flashes for Morse code communication between vessels. The supplied category identifies the equipment as Aldis Lamp, and it is normally installed on the vessel exterior or bridge position required by the approved navigation and signaling arrangement. In that listed role, its primary purpose is to provide the visual or audible signal identified by its listed category. Navigation lights, searchlights, signal lamps and sound appliances differ in purpose, but all are safety-related equipment exposed to weather, vibration and corrosion. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. The source metadata also states capacity: Xenon/LED. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Colorlight CL Series
Xenon/LED
Capacity
Navigation Data / Sensor
Medium

Components & Design

Component data being added…

Technical Data

type Signal Lamp
solas required True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Lamp, LED, driver, diaphragm or sound-generator failure causes loss or weakening of the required signal
Water ingress or corroded terminals causes intermittent operation, earth faults or complete failure
Mechanical mounting, alignment or movement faults reduce beam direction or acoustic effectiveness
Control, limit-switch or bridge-circuit faults cause unavailable remote operation or false failure indication
Lens, reflector, horn opening or exposed surface contamination reduces useful output

Service & Maintenance

Inspect housing, lens or horn opening, seals, mounting, alignment, cabling and controls. Confirm correct bridge or local operation and associated failure indication where fitted. Keep exposed surfaces clean and investigate condensation or corrosion. Refer to approved manufacturer and navigation-signal documentation for the exact figure for sector and performance criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry lamps or LED modules, drivers, diaphragms or solenoids as applicable, fuses, seals, control switches and cable glands.
Equipment Model #819 · ✓ still in production