Oily Water Separator (15 ppm) · Oily Water Separator
Shengli Marine SGL-250 is a 15 ppm oily water separator in the supplied category 'Oily Water Separator / Oily Water Separator (15 ppm)'. It is normally installed in the engine room bilge-treatment area with connections to bilge holding tanks, discharge lines and the oil-content monitoring system. It is intended to separate oil from bilge water before any permitted overboard discharge and to support compliance with the vessel's pollution-prevention procedures. Compared with neighbouring entries in the same series, the supplied data identifies this variant by the source-listed characteristic 0.25 m³/h capacity. In service it interfaces with bilge pumps and tanks, separation stages, oil-content monitor, automatic stopping or recirculation valves, sampling line and control panel. Model-specific limits, settings, dimensions and acceptance criteria that are not stated in the supplied data should be taken from the manufacturer documentation.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Shengli Marine first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect separator internals accessible for routine maintenance, coalescer or filter condition, pumps, valves, drains, sample lines and evidence of unauthorized bypassing. Function-test the oil-content monitor, alarms and automatic stopping or recirculation arrangement using the approved onboard procedure. Check records and seals required by the vessel's pollution-prevention management; use manufacturer documentation for exact test and replacement criteria.
Carry approved coalescer or filter elements, pump seals, valve seals, sample-line components, monitor consumables and critical solenoids or sensors specified for the installed separator.
Free of charge — we forward your request to qualified suppliers for Shengli Marine equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Shengli Marine SGL-250 — a part, a service call, a second opinion. Are you Shengli Marine? Claim this brand page.
Service engineer? Write the day report for this SGL-250 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.